Renishaw Automatic Rack Controller ACC2-2, UK

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The UK Renishaw Automatic Exchange Rack Controller ACC2-2 $r $n is a series of control systems used to connect Renishaw mobile measuring stations and automatic exchange racks to coordinate measuring machines.

Product Details

Mobile seat controller and automatic exchange rack controller

A series of control systems used to connect Renishaw mobile measuring stations and automatic exchange racks to coordinate measuring machines.

ACC2-2 Automatic Exchange Rack Controller

ACC2-2

ACC2-2 processes communication with the coordinate measuring machine controller, controls the ACR1 automatic exchange rack, multiplex transmission, and connects signals between the measuring base and calibration probe.

length	220 mm
width	289.3 mm
height	88 mm
weight	3.85 kg
data transmission	Serial RS232, parallel IEEE
voltage range	85 V to 264 V, 50 Hz to 60 Hz automatic selection

HCU2 Handheld Controller

HCU2

HCU2 is a portable seat drive and position display device designed for use with PHC10-3 and PHC10-3 PLUS mobile seat controllers. It plays an extremely important role in setting workpieces, operator control detection, and teaching loop program programming.

It allows operators to manually change the direction of the measuring seat without the need to transmit commands through the coordinate measuring machine controller.

Its functions include: two speed movement (slow and fast movement), two axis measuring seat display, teaching loop program transmission button, LED status and fault indicator light.

PHC10-3 PLUS Test Seat Controller

PHC10-3

The PHC10-3 PLUS measuring seat controller receives instructions from the coordinate measuring machine controller. PHC10-3 PLUS controls all measuring seat functions and reports system status to the coordinate measuring machine:

Drive PH10 PLUS (PH10T PLUS, PH10M PLUS, or PH10MQ PLUS) in place - transfer from HCU1 or coordinate measuring machine
Check and report the location
Marking errors, such as corner failure, obstruction before and after locking, etc

PHC10-3 PLUS does not process any probe sensor signals. These signals are only transmitted directly to the probe interface through the probe axis and controller.

length	180 mm
width	440 mm
height	44 mm
weight	1.5 kg
data transmission	RS232 or USB
current consumption (At 240 V)	Less than 1 A
PSU electrical rating	Power supply voltage: 100 V to 240 V ± 10% Frequency range: 50 Hz to 60 Hz Power consumption: up to 49 W Transient voltage: Installation category II
input plug	15 pin D-type
power supply	24 Vdc 49 W， Provided by Emerson PSU (DP4024N3M) power adapter
Probe output plug	7-pin DIN or 9-pin D-type
Large cable length RS232 USB	50 m 5 meters (can be extended in units of 5 meters using a hub, and can be extended up to 30 meters)
Handheld controller	Only HCU1

PHC1050 UCC daughter card

PHC1050

The PHC1050 interface board is one of the plug-in daughter cards in the Renishaw UCC universal coordinate measuring machine controller. It is a simple interface between the PH10 PLUS probe and measurement application software, without the need for any external hardware and with minimal cable and plug usage.

Renishaw Automatic Rack Controller ACC2-2, UK