Supply of cargo humidification buckets BLCT1B00W1/BLCT1BOOW1

Supply of cargo humidification buckets BLCT1B00W1/BLCT1BOOW1

CAREL attaches great importance to the relevant certifications of gaSteam, which can ensure the safety of the product and obtain all major certifications

Proof. GaSteam has been certified to comply with European CE standards, German T Ü V, and American ETL standards. For the European market, specific certification DVGW has been obtained for devices operating on gas. In addition, due to low NOx exhaust emissions,

The ultimate SAM system can use steam from both pressurized distribution networks and humidifiers at atmospheric pressure. When a pressurized steam pipeline is supplied, the fluid will reach the distributor through a regulating valve, which adjusts the steam to almost atmospheric pressure.

If the steam is provided at atmospheric pressure, no regulating valve is installed between the ultimate SAM and the steam generator, and the steam flow is regulated based on humidification requirements and directly controlled by the humidifier. In order to minimize the formation of condensed water, baffles and nozzles were added to the design of the steam distributor, ensuring that only dry steam can be delivered to the air treatment unit/duct.

Metal frame structure

(SAKF *, SAKS *) (applicable to SAB */SAT *) SAKS * * 0000: Used for installing the top or bottom support frame of ultimateSAM in ducts/air handling units. SAKFB00000: Ultimate SAM SAB * top corner brace, used for assembling support frames (components include fastening bolts). SAKFR * 0000: Lock ring, used to stabilize the vertical nozzle and

The connection of ultimateSAM SAB *.

SAKFF0 * 000: The frame shaft sealing ring shoulder and frame top side that are compatible with the ultimate SAM SAB *.

(SAKG *) (applicable to SAB */SAT *)

Each component includes:

2 O-rings;

Two gaskets are used for condensate discharge.

These accessories are suitable for humiSteam, compactSteam, heaterSteam, and gaSteam

Supply of cargo humidification buckets BLCT1B00W1/BLCT1BOOW1

distribution pipe

The spare distribution pipe (SAKU *) is sold in the form of components, including:

• Allocation management;

• 1 O-ring;

• Tighten the bolts between the distribution pipe and the horizontal manifold.

Distribution manifold

(SAKM*, SAKMS*, SAKMD*)

Each SAKMS * 00 component paired with SAB * and SAT * only includes a horizontal steam distribution manifold; The gasket is not included. Each SAKMD * 00 component that comes with SAT * includes:

• Horizontal condensate collection manifold;

• A gasket used for connecting vertical distributors. The SAKMSA00 * 0 components that come with SA0 * include:

• Manifold;

• Gasket;

• Tighten the bolts.

The humidifier with a humidification capacity of 2-10kg/h is equipped with a cylindrical stainless steel humidification bucket, which is easy to disassemble and clean. Humidifiers with large humidification capacity, 20-60kg/h, have a stainless steel humidification bucket with a rectangular base and a large opening (front or top) for easy maintenance without removing the humidification bucket.

Product advantages:

• Extremely precise, capable of achieving ± 1% rH;

• The electric heating element is embedded in corrosion-resistant lightweight alloy castings to ensure good thermal conductivity and reliability. (CAREL method)

• Inserting a temperature sensor into the electric heating element to prevent overheating can effectively detect any scale deposits that need to be cleaned in advance. (CAREL method)

• The electric heating element covered with Niflon anti stick coating (advanced configuration type) is very easy to clean;

Humidifiers with H-type and T-type control modes, equipped with solid-state relays, allow continuous adjustment of steam production from 10% of rated steam production, with very precise control. The humidifier with C-type control mode can operate in an on/off mode;

• The "anti foam" system detects foam to prevent any water drop from releasing together with steam;

H-type control supports a second restriction sensor to prevent the formation of any condensation water in the air duct (more hygienic);

Humidifiers with H-type and T-type control modes have preheating function and can respond quickly to steam production requirements;

Humidifiers with H-type control mode can also control dehumidification equipment.

The design feature of VRDXL0000 distributor is that it can be installed at a certain distance from the humidifier, requiring two steam hoses with a diameter of 30mm. All air supply steam distributors can discharge condensate water through a 7mm diameter hose (refer to the instructions below). The DP * * * D * * R * series linear steam distributor for air ducts is composed of stainless steel pipes with drainage holes, using Ryton ® The installation bracket made of materials is fixed. This material has excellent mechanical properties for high temperature resistance.

The new fixed bracket allows the steam distributor to be installed vertically on the wall, ensuring that the steam distributor has the correct inclination and facilitating the discharge of condensate droplets. The stainless steel linear steam distributor comes in three different size specifications (35, 45, and 60mm), which are compatible with steam hoses with diameters of 22, 30, and 40mm, respectively. This type of steam hose can be used in all CAREL humidification systems.

The design feature of a linear steam distributor is that it can evenly release steam throughout the entire steam distributor, which can be reduced

Short absorption distance.

Common humidification bucket models

BL0T1C00H0 380V 3KG/H

BL0T2C00H0 380V 8KG/H

BL0T2B00H0 380V 8KG/H

BL0T3C00H0 380V 15KG/H

BL0T4C00H0 380V 45KG/H

BLCT2B00W0 380V 8KG/H

BLCT2C00W0 380V 8KG/H

BLCT3B00W0 380V 15KG/H

BLCT3C00W0 380V 15KG/H

BLCT4D00W0 380V 45KG/H

BLCT4C00W0 380V 45KG/H

BLCT4B00W0 380V 45KG/H

BL0SRF00H1

BLOSRF00H1

BL0S1F00H1

BLOS1FOOH1

BLCT2C00W2

BLCT2COOW2

BLCT2B00W2

BLCT2BOOW2

BLCT2D00W0

BLCT2D00W2

BLCT2DOOW2

BLCT5C00W0

BLCT5COOWO

BLCS1E00W2

BLCS1EWPW2

BLCS1F00W2

BLCS1FWPW2

BLCT1A00W1

BLCT1AOOW1

BLCT1A00W2

BLCT1AWPW1

BLCT1B00W1

BLCT1BOOW1

BLCT1B00W2

BLCT1BOOW2

BLCT1C00W1

BLCT1COOW1

BLCT1C00W2

BLCT1COOW2

BLCT1CWPW1

BLCT1CWPW2

BLCT1D00W1

BLCT1DOOW1

98CT2BMPW0

98CT2DMPW0

9BCT2DMWO

BLCS2E00W2

BLCS2EWPW2

BLCSF00W0

BLCS2FWPW0

BLCT2A00W2

BLCT2AWPW2

BLCT2B00W0

BLCT2BOOWO

BLCT2B00W2

BLCT2BOOW2

BLCT2BWPW0

BLCT2BWPWO

BLCT2BWPW2

BLCT2C00W0

BLCT2COOWO

BLCT2COOW2

BLCT2C00W2

BLCT2CWPW0

BLCT2CWPWO

BLCT2CWPW2

BLCT2D00W0

BLCT2DOOWO

BLCT2D00W2

BLCT2DOOW2

BLCT2DWPW0

BLCT2DWPWO

BLCT2DWPW2