Welcome Customer !

Membership

Help

Shanghai Xuyue Intelligent Technology Co., Ltd
Custom manufacturer

Main Products:

mechb2b>Products
Product Categories

Shanghai Xuyue Intelligent Technology Co., Ltd

  • E-mail

    976009413@qq.com

  • Phone

    13817773545

  • Address

    Minhang District, Shanghai

Contact Now

Supply Carl humidification bucket BLCT5C00W0/BLCT5COOWO

NegotiableUpdate on 01/21
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Our company supplies a full range of products including Italian Carl air conditioners, humidifiers, and freezers, including the BLCT5C00W0/BLCT5COOWO $r $n. Provide technical support such as selection, quotation, and after-sales service for *. $r $n Details: Our sales engineer, Mr. Sun

Product Details

Supply Carl humidification bucket BLCT5C00W0/BLCT5COOWO

CAREL attaches great importance to the relevant certifications of gaSteam, which can ensure the safety of the product and obtain all major certifications

Proof. GaSteam has been certified to comply with European CE standards, German T Ü V, and American ETL standards. For the European market, specific certification DVGW has been obtained for devices operating on gas. In addition, due to low NOx exhaust emissions,

The gaSteam humidifier has been approved as a Class 5 application device, including UG045 and UG090 models, and as a Class 4 application device, including UG180 model, which means that gaSteam can be installed in those with very strict legal regulations on exhaust emissions. Regarding applications, please refer to the following standards: 90/396/EEC standards;

CAREL gaSteam gas humidifier can use natural gas or liquefied petroleum gas; No need to replace any components, simply modify a few parameters to perform the conversion. The cost-effectiveness of producing 1kg of steam at atmospheric pressure, considering all different factors, requires approximately 750Wh of energy, either electricity or other resources. When choosing a solution within the range of adiabatic humidifiers, a major consideration is energy consumption cost, especially in environments where humidifiers are widely used. In terms of energy, gas can be said to be an ideal solution, and to develop the advantages of gas, a high thermal efficiency system is needed to minimize heat loss.

Supply Carl humidification bucket BLCT5C00W0/BLCT5COOWO

With the excellent experience and technology of Ecoflam, the efficiency of CAREL gas humidifiers reaches 92% to 95%. The following table presents an economic comparison between a gaSteam and an immersion electrode humidifier, based on the total cash flow in euros, including procurement, energy, and maintenance costs. Even taking into account the higher purchase price of gaSteam compared to immersion electrode humidifiers, the cost-benefit balance of using gas humidifiers can still be achieved in the short term. This chart data is calculated based on 2000 operating hours per year using a 90kg/h gas humidifier

The cost of gas and electricity are calculated using Italian prices. This balance point is easily achieved in the first two years of use, followed by significant cost savings. In many others, this equilibrium point can even be reached in a shorter amount of time, indicating that gaSteam has better cost-effectiveness.

The humidifier with a humidification capacity of 2-10kg/h is equipped with a cylindrical stainless steel humidification bucket, which is easy to disassemble and clean. Humidifiers with large humidification capacity, 20-60kg/h, have a stainless steel humidification bucket with a rectangular base and a large opening (front or top) for easy maintenance without removing the humidification bucket.

Product advantages:

Extremely precise, capable of achieving ± 1% rH;

The electric heating element is embedded in corrosion-resistant lightweight alloy castings to ensure good thermal conductivity and reliability. (CAREL method)

Inserting a temperature sensor into the electric heating element to prevent overheating can effectively detect any scale deposits that need to be cleaned in advance. (CAREL method)

The electric heating element covered with Niflon anti stick coating (advanced configuration type) is very easy to clean;

Humidifiers with H-type and T-type control modes, equipped with solid-state relays, allow continuous adjustment of steam production from 10% of rated steam production, with very precise control. The humidifier with C-type control mode can operate in an on/off mode;

The "anti foam" system detects foam to prevent any water drop from releasing together with steam;

H-type control supports a second restriction sensor to prevent the formation of any condensation water in the air duct (more hygienic);

Humidifiers with H-type and T-type control modes have preheating function and can respond quickly to steam production requirements;

Humidifiers with H-type control mode can also control dehumidification equipment.

controller

There are three types of control to choose from:

Type "C": on/off control;

Type "H": Built in humidity controller with Modbus functionality ® The communication port of the network is connected through an external gateway;

T-shaped: Built in temperature controller for independent applications (such as steam baths).

Type C: On/Off Control

The C-type control unit only operates in two states: 0% steam production and rated 100% maximum steam production. This value can be set to 30%, 50%, 75%, or 100% of the rated steam production.

H-type: Built in humidity controller

The "H" type controller can be set to operate in the following modes at any time:

On/off mode, from external humidity controller;

Proportional to external signals from BMS (0~1 V, 0~10 V, 2~10 V, 0~20 mA, 4~20 mA);

Based on external humidity sensors, it is necessary to add restriction sensors inside the air duct for adjustment. In addition to the on/off control mode, the steam production can be linearly adjusted between 10% and 100% of the maximum steam production, ensuring an accuracy of ± 1% rH even in rooms with large ventilation volumes. The preheating function (H-shaped and T-shaped) can be activated to maintain water at a set temperature (70-90 ° C) to ensure that steam production can begin immediately. Any malfunction will be indicated on the display screen and a signal will be sent through the alarm relay.

T-shaped: Built in temperature controller

The working mode is basically the same as the "H" type, except that steam production is controlled based on temperature rather than relative humidity (applicable to steam baths).

Common humidification bucket models

BL0T1C00H0 380V 3KG/H

BL0T2C00H0 380V 8KG/H

BL0T2B00H0 380V 8KG/H

BL0T3C00H0 380V 15KG/H

BL0T4C00H0 380V 45KG/H

BLCT2B00W0 380V 8KG/H

BLCT2C00W0 380V 8KG/H

BLCT3B00W0 380V 15KG/H

BLCT3C00W0 380V 15KG/H

BLCT4D00W0 380V 45KG/H

BLCT4C00W0 380V 45KG/H

BLCT4B00W0 380V 45KG/H

BL0SRF00H1

BLOSRF00H1

BL0S1F00H1

BLOS1FOOH1

BLCT2C00W2

BLCT2COOW2

BLCT2B00W2

BLCT2BOOW2