Supply of Carl Humidifier Barrel BLCT1A00W1/BLCT1AOOW1

Supply of Carl Humidifier Barrel BLCT1A00W1/BLCT1AOOW1

CAREL attaches great importance to the relevant certifications of gaSteam, which can ensure the safety of the product and obtain all major certifications

Proof. GaSteam has been certified to comply with European CE standards, German T Ü V, and American ETL standards. For the European market, specific certification DVGW has been obtained for devices operating on gas. In addition, due to low NOx exhaust emissions,

The gaSteam humidifier has been approved as a Class 5 application device, including UG045 and UG090 models, and as a Class 4 application device, including UG180 model, which means that gaSteam can be installed in those with very strict legal regulations on exhaust emissions. Regarding applications, please refer to the following standards: 90/396/EEC standards;

Main Features

SAB*/SAT*

• Steam humidification capacity: 20~1110 kg/h (44~2440 lbs/h), 0~4 barg (0~58 PSIg), also suitable for atmospheric steam;

• Humidifier size H: 447x598 mm~3031x3181 mm, spacing 152 mm (size 18 "x24"~120 "x120", spacing 6 ");

Humidifiers can be supplied with or without insulation function, with or without support frame, either unassembled or pre assembled.

SA0*

• SA0 * single tube type is also available; The steam flow rate is 20~140 kg/h (44~309 lbs/h), 0~4 barg (0~58 PSIg), which is also suitable for atmospheric steam; The size is 503 mm~2175 mm, with a spacing of 152 mm (size 19 "~86", spacing 6 ").

Supply of Carl Humidifier Barrel BLCT1A00W1/BLCT1AOOW1

UltimateSAM is a steam distribution system that delivers dry steam evenly and effectively to ducts or air handling units under normal or pressurized conditions. SAM stands for short absorption distance manifold, or alternatively, short absorption distance or dry (even less than 0.5 m) steam distribution system.

The design concept of ultimateSAM is to "customize" air handling units/ducts, with insulated air cushions on the nozzle to reduce heat loss from dry steam (up to 2 ° C/4 ° F), while only forming a very small amount of condensed water. All metal components installed in the air handling unit/duct are made of AISI 304 stainless steel, which ensures the hygiene and service life of the product application.

The ultimateSAM humidification system, due to its characteristics, is an ideal solution for humidifying all air handling units/ducts, providing solutions for designers, installers, and service personnel. The product line is complete, with a wide range of optional steam humidification capacity. In addition to many other options, it is an ideal choice for many other applications such as hospitals, pharmaceutical industries, libraries, museums, public rooms, shopping centers, data centers, telecommunications, and more.

The humidifier with a humidification capacity of 2-10kg/h is equipped with a cylindrical stainless steel humidification bucket, which is easy to disassemble and clean. Humidifiers with large humidification capacity, 20-60kg/h, have a stainless steel humidification bucket with a rectangular base and a large opening (front or top) for easy maintenance without removing the humidification bucket.

Product advantages:

• Extremely precise, capable of achieving ± 1% rH;

• The electric heating element is embedded in corrosion-resistant lightweight alloy castings to ensure good thermal conductivity and reliability. (CAREL method)

• Inserting a temperature sensor into the electric heating element to prevent overheating can effectively detect any scale deposits that need to be cleaned in advance. (CAREL method)

• The electric heating element covered with Niflon anti stick coating (advanced configuration type) is very easy to clean;

Humidifiers with H-type and T-type control modes, equipped with solid-state relays, allow continuous adjustment of steam production from 10% of rated steam production, with very precise control. The humidifier with C-type control mode can operate in an on/off mode;

• The "anti foam" system detects foam to prevent any water drop from releasing together with steam;

H-type control supports a second restriction sensor to prevent the formation of any condensation water in the air duct (more hygienic);

Humidifiers with H-type and T-type control modes have preheating function and can respond quickly to steam production requirements;

Humidifiers with H-type control mode can also control dehumidification equipment.

advantage

• A unified and uniform full height vertical distribution pipe nozzle setting system ensures a very short "dry" absorption distance;

• Due to the insulation cushion on the nozzle, heat loss and condensation water are reduced, achieving energy-saving effects;

• Hygiene: The material of ultimateSAM is AISI 304 stainless steel;

Ultimate SAM can be used in conjunction with electric control valves to precisely regulate the steam delivered to AHU/ducts;

Ultimate SAM with different settings can be provided for applications with high steam flow rates, or if the required dry distance is particularly short;

• The single tube type ultimate SAM is insulated, and the supplied manifold can also serve as a steam trap.

System Composition

• AISI 304 steam distribution pipe with or without insulation cushion; For insulated nozzles, the nozzle is made of PPS (Ryton), which can continuously operate at temperatures up to 220 ° C/428 ° F;

AISI 304 manifold transfers steam to the distribution pipe. For applications with steam flow rates ranging from 20 to 370 kg/h (SAB *), the manifold is placed at the bottom; For applications with steam flow rates up to 1110 kg/h, the manifold is installed at the top (SAT * top supply type; Nevertheless, it is applicable to all applications with steam flow rates greater than 60 kg/h);

• Using silicone gaskets, it can withstand high temperatures (up to 150 ° C/300 ° F); if it comes into direct contact with steam, EPDM sealing rings are used;

AISI 304 support frame;

SA0 * Type: Comes with a heat-insulating AISI 304 nozzle with a nozzle.

Common humidification bucket models

BL0T1C00H0 380V 3KG/H

BL0T2C00H0 380V 8KG/H

BL0T2B00H0 380V 8KG/H

BL0T3C00H0 380V 15KG/H

BL0T4C00H0 380V 45KG/H

BLCT2B00W0 380V 8KG/H

BLCT2C00W0 380V 8KG/H

BLCT3B00W0 380V 15KG/H

BLCT3C00W0 380V 15KG/H

BLCT4D00W0 380V 45KG/H

BLCT4C00W0 380V 45KG/H

BLCT4B00W0 380V 45KG/H

BL0SRF00H1

BLOSRF00H1

BL0S1F00H1

BLOS1FOOH1

BLCT2C00W2

BLCT2COOW2

BLCT2B00W2

BLCT2BOOW2