Supply of CAREL humidifier BL0T2C00H0 380V 8KG/H

Supply of CAREL humidifier BL0T2C00H0 380V 8KG/H

Humidification and energy saving

The printing industry requires a particularly large amount of humidification because the processing and storage workshops are large and often require high load control. Thermal insulation humidification is an excellent solution for the printing industry, which can achieve the correct and stable level of air humidity and absorb the sensible heat generated by mechanical devices. For example, 100 kg/h atomized water absorbs approximately 70 kW of heat, while only consuming 1 kW of electricity:

A very advantageous humidification system using renewable energy: water.

Supply of CAREL humidifier BL0T2C00H0 380V 8KG/H

A solution applicable to all applications

The humidification in the printing industry, if using electric or gas-fired steam equipment, is achieved by introducing airflow into the air handling unit or directly humidifying the factory through a supply air steam distributor located inside the processing space. And adiabatic humidification and evaporative cooling come from the atomization frame with nozzles installed inside the air handling unit. The nozzles are distributed in the areas that require air conditioning, usually around the printing machinery, where the demand for humidification is the greatest. For small cars

A centrifugal insulated humidifier that can be installed on the wall is easy to install.

Humidification and evaporative cooling

In terms of product quality, production efficiency, skills, and operating costs, this solution has significant advantages for many industrial applications. Cold storage and food processing humidification systems compensate for the condensation of moisture in the evaporator of the refrigeration system; If this situation does not occur, the air will quickly dry up, causing agricultural products to spoil and reduce in quantity. Drying in the tobacco processing industry can cause tobacco leaves to shrink, resulting in lighter weight and increased fragility. This can cause the tobacco leaves used to produce tobacco, cigarettes, and cigars to rupture, causing cigarette paper to get stuck in the machine.

Quality and productivity of the printing industry

Paper is made from plant fibers (fibrous material) and is a water absorbing material. In winter, due to the heat generated by mechanical devices and the drying air of the heating system, the moisture content in the paper decreases, resulting in changes in paper size and other technical characteristics. If the humidity changes within the range of 10% RH, the length of a piece of paper will vary between 0.1% and 0.2%:

A standard A4 size paper with 16 open sheets can vary up to 2mm in size! For paper storage and printing, the ideal condition is to maintain a relative humidity between 50% and 60%. Humidity control system:

• Reduce printing errors caused by paper changes;

• Can effectively control the paper supply during automatic printing

The issue of disconnection and cracking;

• Avoid paper fluctuations and wrinkles;

• Minimize the issues of electrostatic discharge and electrostatic adhesion;

• Optimize the absorption of ink.

Common humidification bucket models

BL0T1C00H0 380V 3KG/H

BL0T2C00H0 380V 8KG/H

BL0T2B00H0 380V 8KG/H

BL0T3C00H0 380V 15KG/H

BL0T4C00H0 380V 45KG/H

BLCT2B00W0 380V 8KG/H

BLCT2C00W0 380V 8KG/H

BLCT3B00W0 380V 15KG/H

BLCT3C00W0 380V 15KG/H

BLCT4D00W0 380V 45KG/H

BLCT4C00W0 380V 45KG/H

BLCT4B00W0 380V 45KG/H