salt analyzer

NegotiableUpdate on 06/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salinity analyzer can be directly connected through a digital communication interface, providing simple, reliable, and cost-effective on-site sensor monitoring data. The salinity meter also has remote status display, calibration, setting, and fault diagnosis functions. IP68 rated dust-proof and waterproof sturdy shell, 1500N high-strength Kevlar cable, with a maximum transmission distance of over 1.2 kilometers, can be directly installed in water quality analyzers for applications such as reservoirs, rivers, tap water, and sewage.

Product Details

characteristic

Permeable electrode, standard M12 connector
Integrated micro chassis, built-in communicator and sensor
IP68 sturdy submerged anti-corrosion shell, no control box required, can be directly installed on site
Plug and play testing, real-time online measurement
Ultra low power consumption, suitable for outdoor environments without electricity
1500N high tensile strength Kevlar cable
Equipped with temperature compensation
Both the power supply and communication are equipped with lightning surge protection
RS485 digital communication, can be connected in series to form a loop, saving wiring and engineering costs
Standard Modbus RTU communication protocol, can be directly connected to PLC and human-machine interface
Built in memory that can store calibration parameters, technicians can directly take them outdoors for installation after calibration in the laboratory
Read monitoring values through AQCFG tool software for calibration, parameter setting, and fault diagnosis
IECEx CoC/ATEX Cat. 1, Ex ia IIB T5 Ga explosion-proof certification

Typical applications

Drinking water, surface water, groundwater, industrial processes, water treatment, wastewater

technical specifications

general

RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional)
Data resolution: 16 bits (0.001% FS)
Surge protection: 4000 V DC
Power supply: 5~12 V DC, 15 mA
Protection: polarity, overload, short circuit
Safety regulations: CE, FCC

measuring principle
4-pole formula, consisting of 4 electrodes in relative positions, measures resistance. The reciprocal of resistance is multiplied by the electrode constant (electrode distance/resistance surface area) to calculate conductivity, which is then converted to salinity.

Installation method
Immersive, flowing, and plug-in

SMR11 salt analyzer

measuring range	0 ~ 100 ppt, PSU, g/K
accuracy	± 2% reading value
resolution	0.1 ppt
repeatability	± 1% reading value
Operating Pressure	Up to 10 Kgf/cm2
operate temperature	0~60 °C
Water sample flow rate	Minimum 0.1 m/s
reaction time	3 seconds
Protection level	IP68
Temperature sensor	Pt1000
measuring range	0~60 °C
accuracy	±0.1 °C
resolution	0.01 °
repeatability	0.1 °C
Connection method	3/4 "-14PT; 5-core M12 cable head
Shell material	POM
Electrode material	Epoxy resin (EPOXY)
size	Φ 36 Χ 338 mm
weight	Sensor: Approximately 150 grams Cable: approximately 80 g/m

Order number