-
E-mail
service@aquas.com.tw
- Phone
-
Address
No. 56, Lane 321, Sunshine Street, Neihu District, Taipei City, 11492
Product Categories
Kaichuang Water Resources Technology Co., Ltd
Suspended solids analyzer
NegotiableUpdate on 06/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The suspended solids analyzer can be directly connected through a digital communication interface. The suspended solids concentration meter provides simple, reliable, and cost-effective on-site sensor monitoring data. The sludge concentration analyzer also has remote status display, calibration, setting, and fault diagnosis functions. IP68 rated dust-proof and waterproof sturdy shell, 1500N high-strength Kevlar cable, sludge concentration meter with a transmission distance of up to 1.2 kilometers, and sludge concentration analyzer can be directly installed in water quality analyzers for applications such as reservoirs, rivers, tap water, and sewage.
Product Details
characteristic
- Integrated micro chassis, built-in communicator and sensor
- IP68 sturdy submerged anti-corrosion shell, no control box required, can be directly installed on site
- Plug and play testing, real-time online measurement
- Ultra low power consumption, suitable for outdoor environments without electricity
- 1500N high tensile strength Kevlar cable
- Both the power supply and communication are equipped with surge isolation protection
- RS485 digital communication, can be connected in series to form a loop, saving wiring and engineering costs
- Standard Modbus RTU communication protocol, can be directly connected to PLC and human-machine interface
- The mirror window adopts wear-resistant and scratch resistant sapphire glass, which will not wear out during maintenance and cleaning
- Nano coating for mirror windows to prevent sludge deposition
- Automatic cleaning brush reduces maintenance work
- Built in memory that can store calibration parameters, technicians can directly take them outdoors for installation after calibration in the laboratory
- Read monitoring values through AQCFG tool software for calibration, parameter setting, and fault diagnosis
- IECEx CoC/ATEX Cat. 1, Ex ia IIB T5 Ga explosion-proof certification
Typical applications
Drinking water, surface water, industrial processes, water treatment, wastewater
technical specifications
- RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional)
- Data resolution: 16 bits (0.001% FS)
- Surge protection: 4000 V DC
- Power supply: 5~12 V DC, 300 mA
- Protection: polarity, overload, short circuit
- Safety regulations: CE, FCC
Using the built-in LED light source, emitting 880nm near-infrared light, the beam is scattered by suspended particles in the sample, and the signal intensity is measured by the detector to determine the suspended solid concentration of the sample. Due to the fact that LED emits 880nm near-infrared light, it is not affected by the color of the water sample.
Installation method
Immersive, flowing, and plug-in
SMR12 Suspended solids analyzer
| measuring range | 0~20/200/2000/2000 mg/L (upper limit depends on medium), automatic switching |
| accuracy | ± 3% reading value ± 1 mg/L (0-2000 mg/L) ± 5% reading (2000~20000 mg/L) |
| resolution | 0.001 mg/L |
| repeatability | ± 1% reading value |
| light source | LED 880 nm |
| velocity of flow | Up to 3 m/s |
| Operating Pressure | Up to 10 Kgf/cm2 |
| operate temperature | 0~60 °C |
| reaction time | 3 seconds |
| Protection level | IP68 |
| Connection method | 3/4 "-14PT; 5-core M12 cable head |
| casing | SS316L |
| size | Φ 42X196 mm (including cleaning brush) Φ 22 X 130 mm (without cleaning brush) |
| weight | Sensor: Approximately 500 g Cable: approximately 80 g/m |
Order number
