Nitrous nitrogen analyzer

NegotiableUpdate on 06/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The nitrite nitrogen analyzer can be directly connected through a digital communication interface, providing simple, reliable, and cost-effective on-site sensor monitoring data. The optical nitrite nitrogen meter also has remote status display, calibration, setting, and fault diagnosis functions. IP68 rated dust-proof and waterproof sturdy shell, 1500N high-strength Kevlar cable, with a maximum transmission distance of over 1.2 kilometers. The NO2-N meter can be directly installed in application environments such as reservoirs, rivers, tap water, and sewage.

Product Details

Function Description

Strong IP68 submerged shell, no outdoor enclosure required
No need to add chemical reagents
Online real-time measurement
Ultra low power consumption, suitable for outdoor environments without electricity
High stability, zero drift
Both the power supply and communication are equipped with lightning surge protection
1.2-kilometer RS485 digital communication, can be connected in series to form a loop, saving wiring and engineering costs
Provide software for setting, calibration, and data analysis
Standard Modbus RTU communication protocol, can be directly connected to any PLC and human-machine interface, saving I/O module costs
Choose an automatic cleaning brush to avoid sludge deposition
Measurement and compensation of turbidity or total suspended solids concentration
Built in memory that can store calibration parameters, technicians can directly bring them to the field for installation after laboratory calibration

description

Nitrous Nitrogen (NO2-N) Analyzer

type	Optical type
measuring range	SMR28-4: 0~2 mg/L (50 mm) SMR28-5: 0~5 mg/L (20 mm) SMR28-6: 0~10 mg/L (10 mm) SMR28-7: 0~20 mg/L (5 mm) SMR28-8: 0~50 mg/L (2 mm) SMR28-9: 0~100 mg/L (1 mm)
accuracy	± 5% of standard solution
resolution	0.01 mg/L
repeatability	± 3% of standard solution
light source	Xenon flash lamp
angle	180°
optical path	1, 2, 5, 10, 20, 50 mm
Water sample flow rate	0.1~10 m/s
Operating Pressure	Up to 5 Kgf/cm2
operate temperature	0~85 °C
reaction time	30 seconds
Protection level	IP68
Turbidity sensor	LED 880 nm
Measurement range of turbidity (or total suspended solids)	SMR28-4: 0~50 NTU (or 0~100 mg/L) SMR28-5: 0~100 NTU (or 0~200 mg/L) SMR28-6: 0~250 NTU (or 0~500 mg/L) SMR28-7: 0~500 NTU (or 0~1000 mg/L) SMR28-8: 0~1000 NTU (or 0~2000 mg/L) SMR28-9: 0-2000 NTU (or 0-5000 mg/L)
Turbidity accuracy	±5%FS
casing	SS316L; titanium alloy
size	Φ75X416 mm
weight	Sensor: Approximately 3.5 Kg Cable: Approximately 80 g/m

application

Drinking water, surface water, groundwater, industrial processes, water treatment, sewage

general

Signal: RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4~20mA (optional)
Data resolution: 16 bits (0.001% FS)
Surge protection: 4000 V DC
Power supply: 12 V DC ± 10%, 0.5A
Protection: polarity, overload, short circuit
Safety regulations: CE, FCC

Typical applications

Drinking water, surface water, industrial processes, water treatment, sewage

measuring principle

The flickering xenon lamp light source emits a full spectrum of ultraviolet to infrared light on the water sample, which penetrates the water sample through a mirror window to a diode array detector. The spectrum is accurately subdivided to 1 nm, and different light absorptions are measured. Then, based on on-site testing, experimental data, and the correlation analysis between absorption spectra and various interferences (such as chemicals, turbidity, chromaticity, etc.), advanced algorithms are used to compensate for each other, and multiple substance concentrations are analyzed.

order

Ordering Codes:

1. The standard signal cable length is 3m, and customized lengths can be selected according to demand.