Xuzhou diesel engine driven high-temperature and high-pressure cleaning machine

High temperature and high-pressure cleaning machine, hot water high-pressure cleaning machineEquipment parameters:

High temperature and high-pressure cleaning machine, hot water high-pressure cleaning machineStandard configuration:

One 10 meter high-pressure hose, one set of automatic board machine gun, one set of steam spray gun, and one 25 degree fan-shaped nozzle.

High temperature and high-pressure cleaning machine, hot water high-pressure cleaning machineFunction configuration:

Three purpose machine for cold water, hot water, and steam. The steam temperature is 155 degrees and the pressure is 32BAR.

Dual motor design effectively protects the diesel pump system

24V low voltage control

20 second delay master stop switch

Copper shell, industrial grade ceramic plunger crankshaft pump
pressure regulating valve

thermostat

Cleaning agent regulator

safety valve

Seismic oil filled industrial pressure gauge

Fuel filter and fuel quantity indicator
Equipped with overload thermal relay and four pole low-speed motor (1400 rpm)
Stainless steel combustion furnace with thermal efficiency greater than 95%
60m corrosion-resistant double-layer stainless steel coil.

There are many industrial enterprises along the jurisdiction section of Shenyang Power Supply Section, and the air pollution is severe. The nearby overhead contact network equipment is subject to heavy pollution and erosion all year round. In foggy weather or high environmental humidity, surface flashover is prone to cause power outages. To eliminate this issue, this paragraph * introduces * equipment, which will have high flushing efficiency and good cleaning effectInsulator water flushing machineThe flushing of insulators in heavily polluted sections has achieved outstanding results.

A few years ago, the Shenyang power supply section attempted to replace the original glass with silicone rubber insulators with strong pollution resistance and rod insulators with a creepage distance of 1.6mXuzhou diesel engine driven high-temperature and high-pressure cleaning machineSteel and rod type insulators, but this section has a large jurisdiction and many heavily polluted areas, requiring a large amount of work to replace insulators and incurring considerable expenses. Therefore, this method has not been widely implemented. Later, the section organized large-scale joint operations by adding overhead contact line operation vehicles and maintenance personnel, and organizing two or more workshops. In this situation, each skylight could only wipe 100 to 120 insulators. However, due to the shortage of personnel in the section, high-intensity operations by employees were not ideal.

Puyang Zhongyuan Hot Water High Pressure Cleaning Machine AgentThe rectification work of insulators has been troubling the Shenyang power supply section, but the section has not been intimidated by the difficulties and continues to explore and try new methods of insulator cleaning. In a large amount of information, a method called“Insulator water flushing machine”Based on the manufacturer's introduction and actual experience, it has been decided to introduce this device. In order to familiarize employees with this equipment as soon as possible, the paragraph invites personnel from the manufacturer to provide training on the use and precautions of the insulator water washing machine, and adopts a "sieving" method to allow employees to operate one by one, ensuring the correct use of the insulator water washing machine and the personal safety of the operators.

Xuzhou diesel engine driven high-temperature and high-pressure cleaning machine

During the process of flushing the contact wire insulators, the operators adjust the flushing direction and distance according to the actual situation on site, and a string of insulators can be completed in less than a minute. After on-site inspection, the use of insulator water washing machine to wash insulators has been fully recognized by the operators. It not only saves manpower and shortens operation time, but also greatly improves the utilization rate of skylights and can effectively prevent flash pollution accidents.