Walk in salt spray chamber/exit type salt spray box/composite alternating salt spray box.

model

AB-200

Volume and dimensions

Nominal internal volume

8000L

Effective size of inner box

2500×2000×1600 W×H×D（mm）

weight

450㎏

high power

10000KW

high current

15A

Power supply conditions

And power supply

AC380Vsingle-phaseRTheN +Protective grounding; Allowable voltage fluctuation range10% V；

Allowable fluctuation range of frequency50±0.5ＨZ；TN-SPower supply method orTTPower supply method

The grounding resistance of the protective grounding wire is less than4Ω

Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must independently control the use of the equipment

performance metrics

Environmental conditions for use

The ambient temperature is+25℃, relative humidity ≤85%The value measured in the test chamber under the condition of no sample.

Temperature and humidity range

Laboratory temperature:RT～ 50℃

Pressure bucket temperature:RT～ 63℃

relative humidity ≥85%HR

Main technical parameters

Temperature resolution:0. 1℃

Temperature deviation: ±1℃

Temperature uniformity:1℃

Temperature fluctuation: ±0.5℃

Spray volume（m1/80cm2/h）1.0～2.0(At least collect)16Hour, take its average)

Spray pressure:1.00±0.01kgf/cm2

PH valuePH: Neutral6.5～7.2 acidic3.0～3.3

Control time:1S～9999HCan be set arbitrarily

Spray time: 1S～99HCan be set arbitrarily

standing time: 1S～99HCan be set arbitrarily

The experiment meets the standards

GB/T 2423.18-2000salt spray test

GB/T 10125-1997salt spray test

ASTM. B117-07salt spray test

JIS H8502salt spray test

IEC 60068-2-11-1981salt spray test

IEC68-2-52 1996salt spray test

GB/T 12967.3-91CASSAccelerated Acetate Salt Spray Test

GBT 5170-8-2008Salt spray testing equipment

GJB150.11A-2009Environmental testing methods for military equipment laboratories - Salt spray test

GB/T2423.17-2008Salt spray test method

CNS 4159Test method for spray test of copper acetate brine for surface treatment

CNS 4158Salt water spray test method for surface treatment

heating rate

laboratory temperatureRT→+50℃≤40 min

pressure tank temperatureRT→+63℃≤35 min

structural characteristics

Box Structure

The laboratory adoptsPPPlate, thickness 12mmPP The test drug replenishment bottle adopts a hidden water level gauge, which is easy to clean and not easy to break.

The pressure air tank adoptsSUS#304Stainless steel high-pressure resistant bucket has excellent insulation effect

The machine base adoptssquare steelWelded into a mesh structureThe thickened bottom plate can bear a weight of 280kg

The bottom of the machine is equipped with casters and fixed foot cups for easy movement and positioning

The test material rack adopts a flat indexing rack, which can adjust the angle freely to cover and receive fog on all four sides, and can accommodate a large number of samples

sealdooradopthandDynamic,Seal with sealing stripsBeautiful appearance

boxdoor

Laboratory sealingdooradoptPPMaterial, top of boxmakeThe top is110⁰corner

Observation window adoptsacrylicbut

Manual defogging device

Control Panel

Touch screen controller power switch. Spray barometer Spray pressure regulating valve

distribution control cabinet

Water filling solenoid valve, spray solenoid valve, demist solenoid valve, distribution board

Over temperature protector, air saturation pressure tank, spray control valverelay. Solid state relay Break the container.

heating system

Using steam heating method, titanium alloy heating tubeP.I.DControl heating to achieve temperature equilibrium

hydration system

Two types of water replenishment control systems, manual and fully automatic, can be automatically controlled by simply connecting the tap water pipe, making it easy to use

Note: If there are too many impurities or acidity in tap water, a filter should be installed at the inlet

drainage system

Drainage valve control device, manual drainage mode

spray system

Adopting Bernoulli principle to absorb saline water and then atomize it uniformly

*The phenomenon of blocking crystallization can ensure the standard of continuous testing

The nozzle is made of special glass

Spray mode

continuous type/intermittent

Air supply system

Spray pressure is1kg/cm2Adjust in two stages, * times adjust the compressed air to2kg/cm2Enter the saturated tank for heating, adjust for the second time to1kg/cm2spray pressure

Fog exhaust system

Fully automatic pressure balanced mist exhaust device, simply connect the mist exhaust pipe and automatically exhaust mist according to the pressure inside the box

electric control system

controller

Qingrui 880 ColorLCD display temperature controller,Control the temperature of the laboratory and pressure tank.

Program capacity and control function

Available program quantity:30large group,Each large group can consist of 20 small groups

Available memory capacity:600teamRepeatable command execution: Each command can be executed up to 999 times, the program slope can be set by the timeline, and programs can be linked for use. The program is made using a conversational style with simple operation

Having an editor,clear,Insertion and other functions,4Group time signal output control(Controllable control of the test substanceON/OFFaction)

have9groupPIDParameter setting, program execution with jump segments,Maintain functionality and display curves,Data acquisition; Date and time adjustment function; Button and screen lock(LOCK)function.

display resolution

temperature0.01℃； Humidity:0.1% ;Time:1min;

Power off memory function

The power-off recovery mode can be set to: hot start/Cold up/停止

Appointment startup function

You can freely set the startup time, and the machine will automatically run after turning on the power

Input

PT100Platinum resistance

Curve recording function

Equipped with battery protectionRAMCan save the set values, sampling values, and sampling time of the device; The big record time is60sky(When the sampling period is1.5mintime)

Temperature input mode

touchFormula input

Temperature Display

Can display temperature set value and actual temperature value

Work timer

Digital display timer, unit: seconds, minutes, minutes, hours, ten hours can be switched, large timer

9999Hour, small timer1second

Timing setting method

touch screeninput

Program timer

Touch screen inputDisplay programmable timer, two sets of time can be set arbitrarily, infinite loop, timing units: seconds, minutes, minutes, hours, ten hours can be switched, each set of large timer99Hour, small timer1second

Program setting method

touch-sensitiveinput

Operation mode

continuous operation

Total working hours

One time accumulator can monitor the total working time of the machine

Temperature setting range

Upper and lower limits of large temperature range5℃

panel display

Set temperature value, current temperature value, set time, current time, total working time of the machine, over temperature abnormal indicator, water shortage abnormal indicator, operation end indicator, spray status indicator, defogging status indicator

Safety protection device

test chamber

Extreme over temperature protection, water shortage protection

Saturated bucket

Extreme over temperature protection, water shortage protection

heating system

Heating tube dry burning, abnormal water supply, abnormal drainage

power supply

Leakage protection, overload and short circuit protection

Storage environment requirements

The ambient temperature of the equipment should be maintained0℃～+25Within ℃

Installation site requirements

The distance between the left, right, and rear wall panels of the test chamber and the wall must not be less than600mmThe distance from the front to the wall shall not be less than800mmWhen transporting equipment, enter the entrance or passage, elevator, etc,Can I enter to avoid affecting the progress of your company's project.

Acceptance criteria and third-party verification

1.Acceptance criteria: Technical indicators shall be in accordance with the methods specified in the "Technical Agreement" signed by both parties.

2.Acceptance method: Formal acceptance shall be conducted on the site of the purchaser.

3.If the purchaser needs to invite a third party (verified by the Environmental Testing Equipment Quality Inspection Center and issued a valid inspection report) to participate in the acceptance before leaving the factory, the cost shall be borne by the purchaser. If the first acceptance is not qualified, the cost incurred during the second acceptance after improvement by the supplier shall be borne by the supplier.

4.The customer entrusts the Environmental Testing Equipment Quality Inspection Center to conduct calibration on their own.

serial number

Product Name

Place of Origin

Laboratory temperature controller

Guangdong Qingrui

Pressure bucket temperature controller

Guangdong Qingrui

Test box外部

Hebei Hongyuan PVC board

Inside the test box

Hebei HongyuanPVCboard

experimentdoor of the box

Hebei Hongyuan PVC board

Test chamber door

HebeiPVCboard

Test box base

Shanghai custom-made square steel

caster

High-quality domestic

Fixed foot cup

High-quality domestic

temperature limiter

South Korearainbow

heating tube

Taide, Taiwan, China, China

nozzle

custom-made

solid state relay

Yangming, Taiwan, China, China

Water Solenoid Valve

Schneider

Spray solenoid valve

Schneider

Mist removal solenoid valve

Schneider

AC contactor

Actellic

intermediate relay

Omron

self-locking switch

Ningbo

temperature sensor

Hong Kong Baoguang

Salt water filter

Homemade glass

fuse

High-quality domestic

Liquid level element switch

Fanyi, Taiwan, China

pressure tank

304stainless steel

pressure gauge

self-developed

pressure regulating valve

Yadek

Mist exhaust device

自制

air filter

Yadek

single-phase valve

自制

collector

自制

measuring cup

自制

humidity sensor

Hong Kong Baoguang

water level controller

Schneider

wire and cable

High-quality domestic

Transportation costs and insurance

door-to-door delivery

manual

Design, production, and maintenance

tax

Value added tax 17%