Suzhou large salt spray room/Kunshan walk-in salt spray room.

Walk-in salt spray room, large salt spray room, salt spray room

1.Design basis and guiding ideology

1.1 Based on the technical requirements, sample form, sample material, sample size, weight of heavy components, and other relevant technical requirements in the user's bidding document.

1.2At the same time, design according to the standards corresponding to the required equipment.

1.3The structural design of the test box is reasonable and can adapt to the production needs of *, stability, safety, and reliability. It can meet user detection requirements, and is easy to use, operate, and maintain. It has a long service life, beautiful appearance, and a good user interface, making user operation and monitoring simpler and more intuitive.

1.4The main components of the equipment are selected from high-quality products of the manufacturer to ensure the quality and performance of the entire machine. Key configurations and electrical components are selected from imported or joint venture products to ensure equipment stability and normal service life.

1.5Adopting mature and reliable new technologies and processes to reduce energy consumption, save costs, and improve quality.

1.6Electrical control production and installation shall comply with relevant electrical installation standards, operate reliably, and pay attention to electrical protection and interlocking functions.

Walk-in salt spray room, large salt spray room, salt spray room

2.Form and scope of project undertaking

2.1The design, production, procurement of components, installation, and commissioning work undertaken by the project shall be the responsibility of the contractor (supplier).

2.2The common systems of the equipment (power supply, water source, etc.) are connected by the user to the designated location of the supplier, while the fire protection, lighting, ventilation, etc. of the workshop are also the responsibility of the user.

2.3The civil foundation of the equipment shall be made by the user according to the requirements of the supplier.

Walk-in salt spray room, large salt spray room, salt spray room

3Design Execution Standards

3.1GB/T10587-2006Technical conditions for salt spray test chamber

3.2GJB150.11A-2009Environmental testing methods for military equipment laboratories - Part 11: salt spray test

3.3GB/T2423.17-2008Basic Environmental Testing Regulations for Electrical and Electronic Products experimentKaSalt spray test method

3.4GB/T10125-1997Artificial atmosphere corrosion test salt spray test

4.Acceptance Criteria:

GB/T5170.8-2008Basic parameter calibration method for environmental testing equipment of electrical and electronic products Salt spray testing equipment

Walk-in salt spray room, large salt spray room, salt spray room

1、 Main parameter indicators of the equipment

1.Model:AB-270

2.Studio size:2700 mm×1500 mm×1600mm(Length x Depth x Height) (excluding spires)

Outer box dimensions:3200 mm×2000 mm×2400 mm

3. door ： double door2200mm×1500mm,Double fan(Inside:PPBoard with double-layer silicone rubber seal and door lock.

4.Temperature range: 35℃-50℃

5.Temperature fluctuation: ±0.5℃(When unloaded)

6.Temperature deviation degree: ±2℃ (When unloaded)

7.Wen degree ladder Degree: ≤2℃

8.Salt spray settling amount:1-5 ml/h/80cm²adjustable

9.Salt water concentration: 0.5 ～5%adjustable

10.Test time: 0～999 HTheMTheS;How to translate

11.Observation window: 400×500mm(Length x Height)

12.Spray mode: airflow spray, continuous/The gap is arbitrary.

13.Bottom load-bearing capacity: ≥0.5T

15.Average working hours:>2000h

16.Average lifespan:>8 years

17.Noise: ≤ 75dB

18.Rated voltage of laboratory:AC（380±38）V 50Hz±0.5Hz