Vibration intensity meter

Special attention should be paid to the installation of the sensor in the vibration intensity meter to ensure that the rotor vibration has sufficient magnitude to be transmitted to the sensor

Vibration intensity meter
Suitable for machines with ball bearings, in which the vibration of the shaft can be transmitted more to the bearing housing, and can therefore be measured using a speed sensor. However, special attention should be paid to the installation of the sensor to ensure that the rotor vibration is transmitted to the sensor with sufficient magnitude. Vibration intensity monitoring instrument is an important monitoring parameter for rotating machinery. They reflect the operational characteristics and status of the machine. Continuous monitoring of them can prevent the occurrence of faults. Protect the safe operation of the machine.

Vibration intensity meterFunction Description:

1. Display function

The vibration measurement value, I value alarm, and II value alarm set values can be displayed separately on the LED digital tube.

2. Alarm function

When the vibration intensity exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.

3. Alarm delay time setting function

The adjustment range for alarm delay time is 0-3 seconds to prevent false alarms caused by on-site interference.

4. Self diagnostic function

Equipped with power on and power off detection functions, while disconnecting the alarm output circuit, it can effectively suppress false alarms of the instrument.

5. Output interface

Equipped with a current output interface, it can be connected to devices such as computers, DCS, PLC systems, and paperless recorders.