Vibration intensity detector

The vibration intensity detector is suitable for machines with ball bearings, in which the vibration of the shaft can be transmitted more to the bearing housing

Vibration intensity detectorFunction:

1. Display function

The vibration measurement value, I value alarm, and II value alarm set values can be displayed separately on the LED digital tube.

2. Alarm function

When the vibration intensity exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.

3. Alarm delay time setting function

The adjustment range for alarm delay time is 0-3 seconds to prevent false alarms caused by on-site interference.

4. Self diagnostic function

Equipped with power on and power off detection functions, while disconnecting the alarm output circuit, it can effectively suppress false alarms of the instrument.

5. Output interface

Equipped with a current output interface, it can be connected to devices such as computers, DCS, PLC systems, and paperless recorders.

Vibration intensity detectorFrom an independent SG-2 speed sensing signal, the vibration intensity value of the channel is continuously displayed on an LED digital display. In order to provide comprehensive protection, two sensors with an angle of 90 ° need to be installed on a bearing. Require vertical or horizontal installation.