Triethylamine tail gas treatment tower A equipment A device

Triethylamine tail gas treatment tower A equipment A deviceThe manufacturer produces triethylamine tail gas treatment tower and equipment. The materials of the triethylamine tail gas treatment device include fiberglass, PP, PVC, etc. The triethylamine tail gas treatment tower uses phosphoric acid to neutralize and react with it to produce triethylamine phosphate, achieving purification effect.
Working Principle:
The phosphoric acid solution in the triethylamine tail gas treatment equipment fully absorbs the waste gas, removes the triethylamine waste gas, and the purified gas enters the upper part of the tower of the triethylamine tail gas treatment device with a dehydration layer composed of packing balls to remove water, and then is discharged into the atmosphere through the chimney. The entire system is controlled by PLC and has two operation modes: manual and automatic, which are interlocked with the core shooting machine. The triethylamine tail gas treatment tower controls the pH and density values of the circulating purified liquid through an online pH controller, achieving automatic acid addition, water addition, spraying, and automatic detection of pH value.
Parameter table of triethylamine tail gas treatment tower:

The triethylamine tail gas treatment equipment must be managed by a dedicated person, who should regularly check whether the fan is running normally, whether the water pump is running normally, whether the liquid level is normal, whether the sodium hydroxide solution is within the specified range, etc. If any problems are found, they should be solved in a timely manner. The triethylamine tail gas treatment device adds absorption solution through a liquid tank, and when in use, the liquid level is raised to the level of the inlet. After the triethylamine tail gas treatment tower is running, the liquid level is raised again to the level of the inlet; Attention should be paid to replenishing the absorption solution during use. When the triethylamine tail gas treatment equipment is working, check the water level every 8 hours and replenish the absorption solution. When using, the circulating water pump should be turned on for 2-3 minutes before turning on the blower. When stopping, the blower should be stopped for 1-2 minutes before stopping the circulating water pump. The liquid acidity concentration and gas purification degree in the exhaust gas of the triethylamine tail gas treatment device should be regularly checked according to the usage situation. If it exceeds the standard, the absorption liquid in the acid mist purification tower should be replaced.
Triethylamine tail gas treatment tower A equipment A deviceThe amount of waste liquid generated from the treatment of triethylamine waste gas is relatively small, and most enterprises ignore the treatment of waste liquid and directly discharge it into the municipal pipeline network, which can easily cause water pollution. Therefore, collection and processing must be carried out.