PP polypropylene waste gas spray tower cloud dream

PP polypropylene waste gas spray tower cloud dreamThe inner packing layer serves as a spray tower for gas-liquid two-phase contact components. The bottom of the PP polypropylene waste gas spray tower is equipped with a packing support plate, and the packing is placed on the support plate in a disorderly manner. Install a packing pressure plate above the waste gas spray tower packing to prevent it from being blown by the rising airflow.
Working principle of PP polypropylene waste gas spray tower:
The acid mist exhaust gas is introduced into the PP polypropylene exhaust gas spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and defogged by the defogging plate before being discharged into the atmosphere by the fan. The absorption liquid is pressurized by a water pump at the bottom of the PP polypropylene waste gas spray tower and sprayed down from the top of the tower, and then refluxed to the bottom for recycling.
The PP polypropylene waste gas spray tower consists of a waste gas inlet, outlet, window, maintenance inlet hole, and internal structure for supporting and fixing the spray tower.
Spray tower filling layer: filling refers to materials that are filled in other objects;
Spray tower dehazing layer: Due to the large amount of water vapor generated by water circulation spraying, which affects subsequent steps, the dehazing layer is a part of *;
Circulating water pipeline: Its main function is to deliver circulating water to the sprinkler system;
Spray tower circulating water tank: It is integrated with the spray tower and has a capacity of 2-3 minutes for circulating water. The tank is equipped with a floating ball level controller and has reserved inlet overflow and discharge ports for washing water.
Specification Table for PP Polypropylene Waste Gas Spray Tower

Operation process of PP polypropylene waste gas spray tower:
1. Add the water level of the sink and distribution tank to the overflow port of the equipment, and open the inlet valve.
2. Check the pump and fan, and tighten all connecting bolts in a timely manner.
3. Fill the spray box above the PP polypropylene waste gas spray tower with water.
4. Add 15 kilograms of sodium hydroxide and stir the solution to dissolve.
5. Check the fan, spray pump and other components, and restart the power switch button.
PP polypropylene waste gas spray tower cloud dreamImpurities in the gas can be removed by solvent reaction, and the tower can be used in various industries that produce gases that require washing. It can remove impurities and achieve the effect of purifying gas.