Transparency analyzer

NegotiableUpdate on 06/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The transparency analyzer can be directly connected through a digital communication interface, providing simple, reliable, and cost-effective on-site sensor monitoring data, and has remote status display, calibration, setting, and fault diagnosis functions. IP68 rated dust-proof and waterproof sturdy shell, 1500N high-strength Kevlar cable, with a maximum transmission distance of over 1.2 kilometers, can be directly installed in application environments such as reservoirs, rivers, tap water, and sewage.

Product Details

Function Description

Strong IP68 submerged enclosure, no distribution panel required
Online real-time measurement
Ultra low power consumption, suitable for outdoor environments without electricity
High stability, zero drift
Both the power supply and communication are equipped with lightning surge protection
1.2-kilometer RS485 digital communication, can be connected in series to form a loop, saving wiring and engineering costs
Provide software for setting, calibration, and data analysis
Standard Modbus RTU communication protocol, can be directly connected to any PLC and human-machine interface, saving I/O module costs
Choose an automatic cleaning brush to avoid sludge deposition
Built in memory that can store calibration parameters, technicians can directly bring them to the field for installation after laboratory calibration

description

Transparency analyzer

measuring range	0~ 2 m
accuracy	±5% FS
resolution	1 mm
repeatability	±3% FS
light source	LED 880 nm
angle	180°
Water sample flow rate	Up to 5 m/sec
Operating Pressure	Up to 5 Kgf/cm2
operate temperature	0~85°C
reaction time	1 second
Protection level	IP68
casing	SS316L
size	Φ 39 x 344 mm
weight	Sensor: Approximately 0.7 Kg Cable: approximately 80 g/m

general

Signal: RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4~20mA (optional)
Data resolution: 16 bits (0.001% FS)
Surge protection: 4000 V DC
Power supply: 3.6~12 V DC ± 10%, 45 mA
Protection: polarity, overload, short circuit
Safety regulations: CE, FCC

Typical applications

surface water

measuring principle

The transparency of water is related to the receiving intensity of the sensor. Infrared light is used to measure the strength of its absorption and convert it into transparency.

order

Ordering Codes:

1. The standard signal cable length is 3m, and customized lengths can be selected according to demand.