Terminal tank top oil and gas recovery device - amine condensation equipment - VOCs

Terminal tank top oil and gas recovery device - amine condensation equipment - VOCs

Terminal tank top oil and gas recovery device - amine condensation equipment - VOCs

　　Terminal tank top oil and gas recovery deviceIt is one of its important devices, which is used for recovering oil and gas. In the past, we could always smell the smell of gasoline at gas stations. This is because we did not do a good job in oil and gas recovery, which led to oil and gas evaporation and leakage. Therefore, recovering oil and gas is a very important thing. Nowadays, every gas station has installed oil and gas recovery equipment, so it is important to do a good job in the daily maintenance of oil and gas equipment. This is one of the important aspects to ensure the normal operation of oil and gas equipment and to do a good job. Now let's take a look at the daily maintenance methods of oil and gas equipment.

When we smell oil odor while refueling a car, we should immediately check whether the oil gun or hose is broken or leaking, and report it in a timely manner. Every day, we inspect the pipeline connections (flanges, etc.) and oil measuring holes in the operation well to ensure they are tightly connected and free of leakage; Check the oil and gas recovery copper pipes and joints inside the fuel dispenser, and if any leakage is found, use explosion-proof tools to tighten them in a timely manner. Check if the oil discharge port cover and the quick connector cap are tightly closed. Regularly check whether the oil and gas recovery and treatment controller displays normally. If any abnormalities occur, the system alarm type should be recorded and professional personnel should be contacted for troubleshooting. Check if the main casing of the oil and gas processing system is intact. Check whether the copper pipe of the oil and gas recovery motor inside the fuel dispenser is loose, cracked, etc., to avoid oil and gas leakage and accumulation inside the fuel dispenser.

Every day, it is important toTerminal tank top oil and gas recovery deviceClean the oil gun and nozzle with a pure cotton cloth to prevent dust from adhering to them, so as not to be sucked in by the automatic stop feeling and affect the refueling or automatic stop function. When refueling, gasoline droplets may be sucked in by the oil and gas recovery device and accumulate at the bend of the hose. Therefore, the hose should be straightened every 1-2 days before refueling, and the natural adsorption force of the oil gun should be used to suck up the gasoline droplets. The controller of the oil and gas recovery and treatment system should be cleaned regularly (weekly), and the controller display screen should be cleaned with an LCD cleaning cloth. Clean the exterior of the oil and gas treatment system host every week. Before cleaning, the power should be turned off, and the grounding resistance value of the equipment protection should not exceed 4 Ω. When the oil and gas recovery equipment malfunctions, professional personnel are required for maintenance, and gas station employees are prohibited from dismantling it at will.