Temperature gun calibration, thermometer calibration, blackbody infrared calibration furnace

Temperature gun calibration, thermometer calibration, LB-6100 blackbody infrared calibration furnace

Product Introduction

·The blackbody infrared calibration furnace is independently developed by the company, mainly used for infrared *, infrared forehead temperature calibration, and can also be used for calibration of infrared surface screening instruments. It is specifically designed for calibrating various sizes of infrared thermometers, radiation thermometers, infrared thermal imagers, and other radiation thermometers. Calibrate the temperature uniformity of the plane.

·The blackbody infrared calibration furnace, equipped with our company's self-developed temperature cycling system and new materials, can achieve an emissivity of over 0.99, making it an ideal product for calibrating infrared * and forehead temperature.

·Choose an intelligent temperature controller with high temperature control accuracy.

·The temperature rise and fall speed is fast.

·Compared with similar products both domestically and internationally, it has high performance and competitive price.

Temperature gun calibration, thermometer calibration, LB-6100 blackbody infrared calibration furnace

Performance Characteristics

·Novel appearance design, touch screen operation, simple operation;

·The isothermal blackbody cavity has only one cavity opening, and the radiation from the cavity opening is uniformly distributed with the spectrum,The emissivity of the cavity is above 0.99;

·Adopting automatic temperature control method, safe and reliable, fast heating speed, stable temperatureQualitatively good;

·Easy to operate, small in size and light in weight, easy to carry, suitable for useLaboratory calibration can also be used for on-site calibration work;

·New technologies such as displaying measurement values and setting parameter settings using dual row numbers, highHigh precision, multifunctional, and strong resistance to * *;

·Equipped with cooling function, temperature reduction and increase can be quickly achieved, solving the problem of relying on oneselfThe disadvantage of slow cooling;

Technical Specifications

Operation Manual

1. First, connect the power and turn on the fan switch (behind the furnace). Turn on the right (square) switch below the instrument again, and the instrument will display the basic interface;

2. In the basic interface, click on Set Temperature, set the desired temperature, and click the OK button to return to the basic interface;

3. The specific operation of cooling/heating is as follows:

Turn on the knob switch under the instrument panel, turn the mode selection switch to the left to the "heating" position, and start heating up. On the contrary, turning the mode selection switch to the right to the "cooling" position is cooling. The stove is starting to heat up. When the set temperature is close to the actual temperature inside the furnace, detection can be carried out;

After the detection is completed, place the mode selection switch in the "stop" position. When the temperature approaches room temperature, the power can be cut off.

Precautions

During on-site use, the ambient temperature is 20 ± 5 ℃; The power plug must be reliably grounded, using a power supply of AC220V ± 10%, 50 ± 1HZ;

2. Please do not use in environments with oil stains or chemical atmospheres (without corrosive or flammable gases);

Before installing or moving the instrument, please turn off the power to avoid accidents such as electric shock;

4. It is recommended to use neutral cleaning agents to clean the instrument casing;

5. It is strictly prohibited to disassemble components by oneself. If there is a malfunction, please contact our company and we will send professional personnel to repair it.

Configuration List