The Mingcheng Direct Reading Fast Oil Fume Monitor 7021 can immediately obtain accurate oil fume emission data on site. It is fast, convenient, highly sensitive, and has good repeatability stability, greatly improving the monitoring efficiency of cooking oil fume. This product has been widely used by environmental monitoring departments and has received positive feedback.
Mingcheng Direct Reading Rapid Oil Fume Monitoring Instrument7021 type
Product Introduction
The 7021 portable (direct reading) fast oil fume monitoring device can immediately obtain accurate oil fume emission data on site, which is fast, convenient, highly sensitive, and has good repeatability stability, greatly improving the monitoring efficiency of cooking oil fume. This product has been widely used by environmental monitoring departments and has received positive feedback.
Mingcheng Direct Reading Rapid Oil Fume Monitoring Instrument7021 typeMain Features:
1. Real time on-site detection, displaying the actual concentration value of oil fume emissions in real time;
2. Fully automatic measurement, high detection accuracy, and good data repeatability;
3. The sampling interval can be set between 2-15, and the average, maximum, and minimum values of oil fume emissions will be automatically calculated and displayed;
4. The operation is simple and convenient, just press a few keys to complete it;
5. Extremely low operating and maintenance costs;
6. Can detect various other non edible oil fumes;
7. Add wind speed, static pressure, temperature and humidity measurement functions;
8. Meet the technical requirements of the Ministry of Environmental Protection for portable food fume detectors (HJ2526-2012)
Scope of application:
On site monitoring of cooking oil fume concentration in restaurants, dining halls, canteens and other units
2. Check the performance of the oil fume generator and the purification efficiency of the oil fume purifier
3. Detection of harmful smoke concentration in places where non edible oil fumes (such as asphalt smoke, pine cigarettes, etc.) are produced
4. Monitoring of other toxic smoke
Technical Specifications:
Measuring range |
|
lampblack: |
0~60 mg/m³ |
Wind speed: |
0-20 m/s |
Static pressure: |
0-10 KPa |
temperature |
-20℃—80℃ |
Humidity: |
0% -95% (no condensation) |
Oil fume accuracy: |
±0.2 mg/m³When the concentration is ≤ 4 mg/m³, ±5% When the concentration is greater than 4mg/m³ |
Oil fume resolution: |
0.1 mg/m³ |
warm-up time |
3 minutes |
power supply |
AC 220V+10%,50Hz |
power waste: |
≤200W |
Work environment: |
-20~50 ℃, humidity below 90% RH |
Host size and weight: |
360×260×150 mm 3.5kg |
Sampling probe size and weight: |
800mm 3kg |
Pressure and temperature/humidity detection probe |
700mm in length Weighing approximately 2kg |