TJ100-SE Electrolytic Double Spray Thinner

NegotiableUpdate on 02/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TJ100-SE electrolytic dual spray thinning instrument is a touch screen controlled, visualized, intelligent metal electron microscope sample preparation equipment that can accurately control temperature with independent cooling source. The equipment has significant characteristics such as storable and retrievable preparation parameters, good sample preparation effect, and high repeatability. The TJ100-SE electrolytic dual spray thinning instrument is suitable for thinning transmission electron microscopy samples prepared in various colleges, universities, and research institutes. It is easy to operate and convenient to use, and is the sample thinning equipment for transmission electron microscopy laboratories.

Product Details

Product Model	TJ100-SE Electrolytic Double Spray Thinner
Main Features	Touch screen human-machine interface:TJ100-SE adopts a 7-inch full-color touch screen control, which is easy to operate and simple to use. Good human-machine interface design, intuitive data, real-time display of electrolyte temperature and current change curves. Parameter storage and calling function:The polishing voltage, pump flow rate, photosensitive stop value, * temperature, and electrolyte name set for each operation can be named, stored, and called at any time. Voltage scanning function:A selected range of voltage variation scanning operation can be performed on metal samples to obtain the anodic polarization curve of the metal, and appropriate polishing voltage selection can be made on the polarization curve. Stable performance and durability:Corrosion resistant gear pump for liquid transmission, advanced PLC control, segmented pump flow speed and photosensitive stop value, good sample repeatability. Separate the electrolytic cell from the control section to minimize the impact of corrosive media on the control section. The electrolytic cell is divided into an inner cell and a lower shell, with double-layer protection providing better insulation and cooling effects. Independent cooling source cooling control:Adopting an independent low-temperature circulation cooling pump for cooling control, the temperature is directly set on the touch screen, and a second constant temperature field is established in the electrolytic cell for constant temperature control, greatly improving the repeatability of sample preparation. Easy to replace corrosion-resistant sample holder:*Specially designed sample holder with built-in platinum electrode and clamping device, with a rotating shaft clamp cover for clamping and fixing the sample, making it easy to load and take out pieces. The bottom segmented design avoids siphon effect. Independent and lightweight sample holder, easy to replace.
Technical Specifications	1. Power input: AC220V/50Hz, 600W 2. Liquid nitrogen cooling temperature control: ≥ -55 ℃ 3. Cooling machine cooling temperature control: ≥ -30 ℃± 1C (external optional) 4. Electrolytic voltage: 0-220V 5. Electrolytic current: 0-1000mA 6. Electrolyte injection volume: 500ml 7. Light sensitivity range: 0-800 levels 8. Liquid pump speed regulation: 0-99 levels 9. Sample holder: suitable for standard samples with a diameter of 3mm
Optional accessories	Circulating cooling pump
Optional accessories	The specific parameters are as follows: 1. Liquid tank capacity 5L 2. Coolant ethanol 3. Loop mode: internal and external loop 4. Inner container size Φ 20 * 20cm 5. High flow rate 15L/min 6. Cooling capacity 1600W@20 ℃ 7. No load refrigeration -35 ℃ 8. Size 640 * 450 * 890mm 9. Temperature control accuracy less than ± 1 ℃ 10. Weight 40Kg 11. Set the temperature on the touch screen, use a circulating cooling pump to output refrigerant, control the temperature, and cool the electrolyte through a cooling coil to establish a second constant temperature field.
Product Specifications	1. Insulation box size: 325mm (W) 240mm (D) * 170mm (H) 2. Electrolytic cell size: 180mm (w * 150mm (D) * 50mm (H)) 3. Control box size: 290mm (w) 250mm (D) * 180mm (H)