Suzhou large walk-in salt spray room/customized design.

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salt spray corrosion environment simulation laboratory can simulate typical environmental conditions in nature at any time without being limited by time and season. Putting the product into an environmental simulation laboratory for environmental simulation testing, replacing the usage environment with a simulated environment, can save a lot of manpower and material resources, and save development costs. At the same time, environmental simulation testing is based on the product's usage environment conditions, controlling the product's usage conditions. The testing has an "acceleration" property, which can shorten the product's testing cycle.

Product Details

The salt spray chamber is used to assess the salt spray corrosion resistance of materials and protective layers, as well as to compare the quality of similar protective layers. It also evaluates the salt spray corrosion resistance of certain products. This salt spray chamber is used for salt spray corrosion testing of components, electronic components, metal materials, and industrial products. According to the testing requirements, it can be divided into neutral salt spray testing, acidic salt spray testing, copper accelerated acetate salt spray testing, and alternating salt spray testing

Main parameter indicators of the equipment

1.Model:AB-250C

2.Studio size:2500mm×2500 mm×2000mm(Width x Depth x Height) (excluding spire)

Outer box size: 3050mm×2850mm×2800mm(Width x Depth x Height)

3. door ： Open the door, 2000mm×1900mm(height and width)(Equipped with silicone rubber seal and door lock

4.Temperature range: 35℃-50℃

Saturation bucket temperature range: 47 ℃ -70 ℃

5.Temperature fluctuation: ±0.5℃(When unloaded)

6.Temperature deviation degree: ±2℃ (When unloaded)

7.Wen degree ladder Degree: ≤2℃

8.Salt spray sedimentation rate: 1-5 ml/h/80cm²adjustable

9.Salt water concentration: 0.5 ～5%adjustable

10.Test time: 0～999 HTheMTheS;How to translate

11.Observation window: 500×400mm(Length x Height)

12.Spray mode: airflow spray, continuous/The gap is arbitrary.

13.Bottom load-bearing capacity: ≥1000kg

15.Average working hours:>2000h

This model can be heated by water or air, and the water heating is equipped with both manual and automatic water addition systems. The temperature controller adopts a 9-inch touch screen. This material can be selected from PVC, PP, and stainless steel materials. If there is any uncertainty, please consult our company.