Suzhou Weier produced all steel experimental edge platform, corner edge platform, edge platform

（1） Technical requirements for all steel experimental edge platform:

Boundary dimension error value: length, width, and height ≤ 3mm; table diagonal or frame diagonal ≤ 1000mm, allowable error value for adjacent edge perpendicularity ≤ 3mm; table diagonal or frame diagonal>1000mm, allowable error value for adjacent edge perpendicularity ≤ 4mm.

（2） Process requirements for all steel experimental edge platform:

2.1 The countertop is made of laboratory 12.7mm thick core physical and chemical board, with edges up to 25.4mm on all sides. It is corrosion-resistant, resistant to various strong acids, bases, and organic solvents, tough, impact resistant, high temperature resistant to 200 ℃, waterproof, anti bacterial growth, free of any toxic substances, and healthy, environmentally friendly, and anti-static.

2.2 The cabinet and drawer door panels are made of 1.2mm high-quality cold-rolled steel plates that are cut, stamped, bent, and gas shielded welded by machine tools. The surface is treated with rust prevention processes such as oil removal, acid washing, and phosphating, and then treated with epoxy resin spraying technology. It has the characteristics of strong acid and alkali resistance, corrosion resistance, impact resistance, and strong toughness. The surface of the steel is flat and smooth, without obvious welding scars, bubbles, dents, indentations, scratches, cracks, pitting, chipping, and cutting edges. The drilling position is determined by the mold. Cutting, drilling, and chamfering should be deburred.

2.3 The installation of various accessories should be tight, flat, upright, firm, and the joints should be free of cracks or looseness. Metal accessories should undergo rust removal and anti-corrosion treatment.

2.4 The gap between the door and the frame, door and door, door and drawer, with a spacing of 1-3mm; the upper line has moderate elasticity, and the length along the line has an error of ≤ 0.5mm compared to the board length; the size error of the wire hole is ≤ 0.5mm; the drawer droops ≤ 20mm after being pulled out, and swings ≤ 10mm; the table top chamfer is uniform *, with a chamfer radius of ≤ 2mm; it is required to be horizontal and stable.

2.5 Cleaning: The surface of the workpiece should be free of adhesive stains, especially the edge sealing area and the belt surface should be flat and clean.

2.6 Hinges and handles: The hinges are made of Sakura brand anti-corrosion alloy material, meeting the standards of the hardware industry. The handle adopts Shanghai Yangli brand stainless steel brushed handle.

2.7 Three section guide rail: Adopting Puxin brand, it can withstand a pressure of 30 kilograms, molded with molds, and can stretch and retract freely, allowing it to stay in all spaces at will.

2.8 Adjustable feet: ABS injection molded adjustable feet, stainless steel metal screws, height adjustable, adjustable range of 30-50mm, anti slip and shock-absorbing.

All steel experimental platformstandard size

The specific size can be customized according to the actual needs of the user.