Aluminum Wood * Experimental Platform

（1） Technical requirements for aluminum wood * experimental bench products:

Boundary dimension error value: length, width, and height ≤ 3mm; table diagonal or frame diagonal ≤ 1000mm, allowable error value for adjacent edge perpendicularity ≤ 3mm; table diagonal or frame diagonal>1000mm, allowable error value for adjacent edge perpendicularity ≤ 4mm.

(II)Aluminum Wood * Experimental PlatformProcess requirements:

2.1 The countertop is made of laboratory 12.7mm thick core physical and chemical board, with edges up to 25.4mm on all sides. It is corrosion-resistant, resistant to various strong acids, bases, and organic solvents, tough, impact resistant, high temperature resistant to 200 ℃, waterproof, anti bacterial growth, free of any toxic substances, and healthy, environmentally friendly, and anti-static.

2.2 The cabinet, door panels, and drawers are made of high-quality melamine density board with a thickness of 18mm. The veneer and edge sealing components should be tight and flat, without delamination, bubbling, depression, indentation, surface scratches, pockmarks, cracks, chipping, and cutting edges. The rounded corners and edges on the surface should be uniform. The perimeter is treated with waterproof edge sealing technology using a fully automatic edge sealing machine, with a thickness of 2mm for the edge sealing strip. The cabinet is in a floor standing form with added skirting edges.

2.3 Backboard: Made of 9mm thick high-quality melamine fireproof board, the section is sealed with hot-melt PVC edge for moisture-proof treatment, and can be flexibly disassembled.

2.4 The installation of various accessories should be tight, flat, upright, firm, and the joints should be free of cracks or looseness. Metal accessories should undergo rust removal and anti-corrosion treatment.

2.5 The gap between the door and the frame, door and door, door and drawer, with a spacing of 1-3mm; the upper line has moderate elasticity, and the length along the line has an error of ≤ 0.5mm compared to the board length; the size error of the wire hole is ≤ 0.5mm; the drawer droops ≤ 20mm after being pulled out, and swings ≤ 10mm; the table top chamfer is uniform *, with a chamfer radius of ≤ 2mm; it is required to be horizontal and stable.

2.6 Cleaning: The surface of the workpiece should be free of adhesive stains, especially the edge sealing area and the belt surface should be flat and clean.

2.7 Hinges and handles: The hinges are made of Sakura brand anti-corrosion alloy material, meeting the standards of the hardware industry. The handle adopts Shanghai Yangli brand stainless steel brushed handle.

2.8 Three section guide rail: Adopting Puxin brand, it can withstand a pressure of 30 kilograms, molded with molds, and can stretch and retract freely, allowing it to stay in all spaces at will.

2.9 Adjustable feet: Specially made stainless steel adjustable feet, lined with waterproof nylon hexagonal loops, anti slip, shock-absorbing and corrosion-resistant, adjustable height of 30-50mm, capable of bearing more than 300 kilograms. And equipped with load-bearing nuts.

standard size

The specific size can be customized according to the actual needs of the user.