-
E-mail
380423181@qq.com
-
Phone
15262381768
-
Address
Wujiang Tongli Development Zone
Suzhou Jieyi Purification Technology Co., Ltd
380423181@qq.com
15262381768
Wujiang Tongli Development Zone
Sodium chloride aerosol generator
YS-AT142 Integrated Nebulizing Aerosol Generator

1、 Overview:
Aerosol generators are required in many practical tests, and it is necessary to continuously and stably generate concentration adjustable aerosol particles with a fixed particle size distribution.
Most spray aerosol generators have specially designed nozzles. Compressed air is blown into the liquid to be atomized through an annular gap
The shear force between them fully disperses the droplets in this so-called annular gap, forming small aerosol particles, while the inertial collider captures larger aerosol particles
And return to the liquid container, so that the output particle size is mainly distributed inBelow 2 μ m.
The advantage of YS-AT142 integrated atomizing aerosol generator lies in its built-in micro air compressor, which can work when powered on, and can also be directly connected
The YS-AT142 is a multifunctional integrated atomizing aerosol generator that works with a compressed air source. Its compact body is easy to carry and is very suitable for on-site testing of filters and clean environments.
2、 Application scope:
At the bottomFilter testing
At the bottomParticle size instrument evaluation
At the bottomWind tunnel seeding
At the bottomLaminar flow box test
At the bottomacceptance test
At the bottomGeneral testing, aerosol generation
3、 Technical parameters:
At the bottomParticle type:DES,PAO,DOPLiquid paraffin oil,NaCl,KCl,PSL, other salt solutions
At the bottomParticle size range of aerosol:0.1~3.0μm、0.2~0.3μm(DES sample)
At the bottomOutput particle concentration:> 107/cm3
At the bottomParticle mass flow rate:2.5 kg/h(DESsample)
At the bottomflow Quantity:1.0~4.2 L/min
At the bottomqi Source: Built in air pump or external compressed air
At the bottomAir purification: built-inHEPA (High Efficiency Filter)
At the bottomCounterpressure:10kPa(0.1bar)
At the bottomPower requirements:AC220V±10% / 50Hz
At the bottomInstrument size:300 mm x 120 mm x 195 mm
At the bottomInstrument weight:4.8 kg