Product Categories

Shenyang Kejing Automation Equipment Co., Ltd

E-mail
kejing@sykejing.com
Phone
18624331856,18624331865,18624331992,18624331806,18
Address
No. 26-2-7 Xuefeng Road, Hunnan New District, Shenyang, Precision Instrument Industrial Park

Contact Now

SP-15VSC suction casting induction melting furnace

NegotiableUpdate on 02/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SP-15VSC suction casting induction melting furnace is a 15KW induction heating/melting system with MET quality certification and a vacuum suction casting device on the top. This * structural design castings products (3-5mm diameter alloy rods) by directly drawing molten metal into the top quartz tube. The suction force applied by the vacuum suction casting device can cause rapid movement of the melt, resulting in rapid solidification of the melt inside the quartz tube. This equipment uses suction casting method to cast alloys, which can effectively reduce alloy shrinkage defects and is an ideal tool for preparing small-diameter alloy rods.

Product Details

productname

SP-15VSC suction casting induction melting furnace

Technical Specifications

1induction heater

Working voltage: 220V AC, 50/60Hz single-phase; Working current: 34A (up to 40A)

High oscillation power: 15KW; High input power: 7KW; Output frequency: 30-80Hz (adjustable); Duty cycle: 80%

Induction coil size: 70mm (OD) × 65mm (ID) × 80mm (H)

Automatic heating time: 1-99s; automatic constant temperature time: 1-99s; automatic cooling time: 1-99s

Air cooling: rear fan; Protection: Automatic water pressure, over temperature and over power protection

2Vacuum suction casting

The top suction casting device can produce alloy rods with a length of 150mm and a diameter of 3-5mm using suction

The use of this suction casting method can effectively reduce alloy shrinkage defects

The suction force is generated by the rapid movement (manual operation) of the syringe piston

The observation window (Φ 12) on the top flange can monitor the condition of the melt

A quartz tube (7mmOD) x 4mmID x 500mmL) is inserted through the top armor opening for suction casting.

Warning: The temperature of the casting alloy should be less than 1200 ℃ to avoid damaging the quartz feeding tube

3. Graphite crucible&refractory lining&protective cover

A complete refractory lining made of alumina (5mm thick), including a bottom crucible support, crucible, and cover plate.

Includes 1.5 "OD x 1.25" ID x 3.75 "(Deep) graphite crucible

Boron nitride crucible (30 O.D × 24 I.D × 26 H mm) can be provided upon request.

4Sealed flange&quartz chamber

Stainless steel flange with high-temperature silicone O-ring and self tightening structure

Two needle valves and a vacuum gauge are installed on the flange.

Including a semi open quartz tube with dimensions of 60mm (OD) x 52mm (ID) x 225mm (L)

KF25 connector and 1000mm long corrugated pipe are connected to the vacuum pump

For safety reasons, the safety valve is designed to control a pressure of ≤ 0.02MPa

5water cooling machine

Temperature range: 2-35 ℃; Water flow rate: 16L/min

Water tank: with a capacity of 6L, made of stainless steel material

Attention: It is recommended to use a specific coolant to achieve excellent performance. Waiting for a few minutes to cool down after several heating tests is a normal phenomenon

6vacuum pump

Comes standard with a 156L/min two-stage rotary vane vacuum pump.

Vacuum degree: up to 10E-4 Torr

Voltage: AC 208-240V 50/60Hz, single-phase; High power: 4KW

7Product dimensions

Induction heater: 800L × 600W × 1000Hmm

Water cooling machine: 460L × 475W × 762Hmm

Area of movable furnace frame platform: 600L × 800Wmm (used for placing induction heaters and quartz tubes)

Net weight: 135Kg