Radar water level meter

NegotiableUpdate on 06/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The radar liquid level gauge can be directly connected through a digital communication interface, providing simple, reliable, and cost-effective on-site sensor monitoring data, and has remote status display, calibration, setting, and fault diagnosis functions. IP68 rated dust-proof and waterproof sturdy shell, 1500N high-strength Kevlar cable, with a maximum transmission distance of over 1.2 kilometers, can be directly installed in water quality analyzers for applications such as reservoirs, rivers, tap water, and sewage.

Product Details

characteristic

Integrated micro chassis, built-in communicator and sensor
IP68 sturdy submerged anti-corrosion shell, no control box required, can be directly installed on site
Plug and play testing, real-time online measurement
Ultra low power consumption, suitable for outdoor environments without electricity
1500N high tensile strength Kevlar cable
Both the power supply and communication are equipped with surge isolation protection
RS485 digital communication, can be connected in series to form a loop, saving wiring and engineering costs
Standard Modbus RTU communication protocol, can be directly connected to PLC and human-machine interface
Built in memory that can store calibration parameters, technicians can directly take them outdoors for installation after calibration in the laboratory
Read monitoring values through AQCFG tool software for calibration, parameter setting, and fault diagnosis

Typical applications

Drainage, surface water, wastewater

technical specifications

general

Signal: RS485 digital interface (standard Modbus RTU communication protocol), 19200 bps, 8 data bits, no parity, 1 stop bit; 4-20 mA, HART protocol (optional)
Data resolution: 16 bits (0.001% FS)
Surge protection: 4000 V DC
Power supply: 5~12 V DC, 0.5 mA
Protection: polarity, overload, short circuit
Safety regulations: CE, FCC

measuring principle
FMCW continuously transmits radar wave signals, measures the time difference reflected back by the water surface, and calculates the water level.

Installation method
Wall mounted and pole mounted

SMR61 radar level gauge

type	Radar wave
frequency	SMR61-1: 60 GHz SMR61-2: 24 GHz
angle	8°
measuring range	SMR61-1: 0 ~ 7 m SMR61-2: 0 ~ 40 m
accuracy	SMR61-1: ±2 mm SMR61-2: ±1 cm
resolution	0.1 mm
operate temperature	-40~85 °C
reaction time	5 seconds
Protection level	IP68
Connection method	1 "-11PT; 5-core M12 connector
casing	POM
size	Φ 90 Χ150(H) mm
weight	Sensor: Approximately 1.2 Kg Cable: approximately 80 g/m

Order number