Portable automatic constant temperature water bath

1Portable automatic constant temperature water bathInstrument Introduction

This instrument adopts quasi multicomponent compound semiconductor refrigeration components based on rare element bismuth telluride, which are small in size, light in weight, and easy to use. The whole machine has no other rotating parts except for the cooling fan and circulating water pump, and does not require any refrigerant. It has incomparable advantages over traditional compressor refrigeration, such as low noise, light in weight, low failure rate, and convenient transportation.

IIPortable automatic constant temperature water bathMain parameters

1. Power supply voltage: 220V

2. External water cup: ≥ 1L (meets penetration requirements)

3. Cooling power: 12V 5A Heating power: 12V 5A

5. DC power supply: 12V 12A (cooling)

7. Circulating flow rate: ≥ 2L/min

8. Set temperature: 25 ℃ (can be set within the range of 20-30 ℃). The upstream PV (green) represents the current temperature value, and the downstream SV (red) represents the set value.

9. Display accuracy: 0.1 ℃

IIIUsage environment

Please use it in a clean environment with a room temperature of 10 ℃ -30 ℃ and an air humidity of ≤ 80%. If it is not used for a long time, especially when the ambient temperature is below 0 ℃, be sure to drain the instrument and the water in the external water cup to avoid freezing and damaging the instrument.