-
E-mail
shenborui888@163.com
-
Phone
13510633860 17722681566
-
Address
14C, Block A, Xinhe Aiqin Residence, Buji Street, Longgang District, Shenzhen
Product Categories
Shenzhen Shenborui Instrument Co., Ltd
Minolta Display Color Analyzer CA-210 Brightness Meter Illuminance Meter Density Meter
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The measurement range has been expanded to the low brightness range, and the measurement speed has also been improved. In addition, CA-210 adopts a new optical approach to reduce the impact of angle dependence on LCD displays, and can use a measurement angle of+/-2.5 degrees, which complies with IEC standards. The built-in flicker measurement method enables this product to handle multiple tasks simultaneously. $r$n$r$n
Product Details
Product Features
Product Overview
- CA-210 can measure the brightness and chromaticity of LCD displays and various other display devices at a speed of up to 20 times per second.
- Provide two types of detectors with different measuring calibers and cable lengths: standard measuring detector or LCD scintillation measuring detector. Please choose according to the specific measuring object.
- The maximum low measurement brightness can reach 0.1 cd/m2This device can adjust or measure the grayscale coefficient.*1
- Can measure chromaticity with an accuracy of ± 0.002 for white and ± 0.004 for monochrome.*2
- Use an XYZ filter that approximates the CIE 1931 isochromatic function.
- The measurement distance has been shortened to 30 ± 10mm, and the measuring device is lightweight and compact.
- Using a special optical system, the measurement opening accuracy is designed to be ± 2.5 degrees, which can minimize the inconvenience caused by special field of view angles during measurement.*3
- The use of 4-digit representation for chromaticity improves the accuracy of chromaticity values.
- A CA-210zui can connect up to 5 sensors. (Additional accessories are available for sale; CA-B14 4-detector expansion board and additional detectors are required.). ）
main purpose
Standard measurement detector: for color adjustment, inspection, and quality management of measuring objects such as PDP, OLED, back projector, FED, etc; White balance check and adjustment; Adjust and check the grayscale coefficient; Adjust the contrast.
LCD scintillation measurement detector: for color adjustment, inspection, and quality management of active matrix LCD panels, LCD displays, LCD TVs, and other measuring objects; White balance check and adjustment; Gamma correction and inspection; Adjust the contrast.
Specifications
Main specifications
| category | CA-210 (Universal) | CA-210 (Small General Purpose) | |||
|---|---|---|---|---|---|
| sensor | Silicon optical component | ||||
| Measuring caliber | Ø27mm | Ø10mm | |||
| Light receiving angle | ±2.5° | ±5° | |||
| positioning function | Using light-emitting diodes | ||||
| measure distance | 30±10mm | 30±5mm | |||
| display range | brightness | 0.01-1000cd/m2 | 0.01-3000cd/m2 | ||
| chroma | Can be displayed as 4 or 3 decimal places (optional) | ||||
| brightness | measurement range | 0.10-1000cd/m2 | 0.30-3000cd/m2 | ||
| precision※1 | ± 2% ± 1digit LCD calibration (6500K, 9300K) | ||||
| Repeatability (2 σ)※1 | 0.1%+1digit | 1.00cd/m2above | 0.1%+1digit | 3.00cd/m2above | |
| 0.2%+1digit | 0.10-0.99cd/m2 | 0.2%+1digit | 0.30-2.99cd/m2 | ||
| chroma | measurement range | 0.10-1000cd/m2 | 0.30-3000cd/m2 | ||
| precision LCD calibration （6500K,9300K）※1 | ±0.003 ±0.002 ±0.005 ±0.008 (± 0.004 for monochrome) | 40.00cd/m2above 160.00cd/m2 5.00-39.99cd/m2 0.10-4.99cd/m2 | ±0.003 ±0.002 ±0.005 ±0.008 (± 0.004 for monochrome) | 120.00cd/m2above 160.00cd/m2 15.00-119.99cd/m2 0.30-14.99cd/m2 | |
| Repeatability (2 σ) LCD （6500K,9300K）※1 | 0.001(2σ) 0.003(2σ) 0.008(2σ) 0.015(2σ) | 2.00cd/m2above 0.50-1.99cd/m2 0.20-0.49cd/m2 0.10-0.19cd/m2 | 0.001(2σ) 0.003(2σ) 0.008(2σ) 0.015(2σ) | 6.00cd/m2above 1.50-5.99cd/m2 0.60-1.49cd/m2 0.30-0.59cd/m2 | |
| Scintillation contrast Measurement Mode | measurement range | —— | |||
| display range | —— | ||||
| precision | —— | ||||
| repetitiveness | —— | ||||
| Scintillation JEITA pattern | measurement range | —— | |||
| precision | —— | ||||
| repetitiveness | —— | ||||
| measure speed | xyLv*3 | 5（4.5） 20（17） | 0.10-3.99cd/m2 4.00cd/m2or above | 5（4.5） 20（17） | 0.30-11.99cd/m2 12.00cd/m2or above |
| Scintillation contrast | —— | ||||
| Scintillation JEITA | —— | ||||
| display | number | xyLv,XYZ,T ΔuvLv,u'v'Lv,RGB 分析 The chromaticity value can be displayed up to 4 decimal places (or 3 decimal places can be selected for display) | |||
| simulation | ΔxΔyΔLv, R/GB/GΔG, ΔRB/RG/R | ||||
| LCD | 2-line 16 bit display (with backlight) | ||||
| synchronous mode | NTSC, PAL, EXT, UNIV, INT | ||||
| Synchronous frequency range of the tested screen | Vertical synchronization signal: 40-200Hz | ||||
| Number of memory channels | 100通道 | ||||
| Analyzer mode | standard functions | ||||
| interface | RS-232C (38400bps or below), USB（Rev.1.1） | ||||
| Multi probe expansion | Zui has 5 additional measurements (using 4 probe expansion boards CA-B14) | ||||
| software | CA SDK software (standard accessory) | ||||
| Working temperature/humidity range | Temperature: 0-40 degrees, relative humidity of 85% or below, no condensation | ||||
| Storage temperature range | -20-55 degrees, relative humidity of 85% or below (at 35 degrees), no condensation | ||||
| Input voltage range | 100–240V~,50–60Hz,50VA | ||||
| size | Host: 340 (W) × 127 (H) × 216 (D) mm, Measuring head: Ø 49 × 204mm | Host: 340 (W) × 127 (H) × 216 (D) mm, Measuring head: Ø 49 × 232mm | |||
| weight | Host: 3.58kg, probe: 520g | Host: 3.58kg, probe: 540g | |||
| working environment | Equipment type: 2; Pollution index: 2 | ||||
| Standard Accessories | AC power adapter, color analysis software CA-SDK, rubber sleeve CA-H10 | ||||
| category | CA-210 (LCD flashing) | CA-210 (small LCD flashing) | |||
|---|---|---|---|---|---|
| sensor | Silicon optical component | ||||
| Measuring caliber | Ø27mm | Ø10mm | |||
| Light receiving angle | ±2.5° | ±5° | |||
| positioning function | Using light-emitting diodes | ||||
| measure distance | 30±10mm | 30±5mm | |||
| display range | brightness | 0.01-1000cd/m2 | 0.01-3000cd/m2 | ||
| chroma | Can be displayed as 4 or 3 decimal places (optional) | ||||
| brightness | measurement range | 0.10-1000cd/m2 | 0.30-3000cd/m2 | ||
| precision※1 | ± 2% ± 1digit LCD calibration (6500K, 9300K) | ||||
| Repeatability (2 σ)※1 | 0.1%+1digit | 1.00cd/m2above | 0.1%+1digit | 3.00cd/m2above | |
| 0.2%+1digit | 0.10-0.99cd/m2 | 0.2%+1digit | 0.30-2.99cd/m2 | ||
| chroma | measurement range | 0.10-1000cd/m2 | 0.30-3000cd/m2 | ||
| precision LCD calibration （6500K,9300K）※1 | ±0.003 ±0.002 ±0.004 ±0.005 (± 0.004 for monochrome) | 200.00cd/m2above 160.00cd/m2 5.00-19.99cd/m2 0.10-4.99cd/m2 | ±0.003 ±0.002 ±0.004 ±0.005 (± 0.004 for monochrome) | 60.00cd/m2above 160.00cd/m2 15.00-59.99cd/m2 0.30-14.99cd/m2 | |
| Repeatability (2 σ) LCD （6500K,9300K）※1 | 0.001(2σ) 0.002(2σ) 0.005(2σ) 0.010(2σ) | 1.00cd/m2above 0.50-0.99cd/m2 0.20-0.49cd/m2 0.10-0.19cd/m2 | 0.001(2σ) 0.002(2σ) 0.005(2σ) 0.010(2σ) | 3.00cd/m2above 1.50-2.99cd/m2 0.60-1.49cd/m2 0.30-0.59cd/m2 | |
| Scintillation contrast Measurement Mode | measurement range | 5 cd/m2 | 15 cd/m2or above | ||
| display range | 0.0 - 100% | ||||
| precision | ± 1% (30 Hz AC/DC 10% sine wave) ± 2% (60 Hz AC/DC 10% sine wave) | ||||
| repetitiveness | 1% (2 σ) (AC/DC 10% sine wave) | ||||
| Scintillation JEITA pattern | measurement range | 5 cd/m2or above | 15 cd/m2or above | ||
| precision | ± 0.5 dB (30 Hz AC/DC 10% sine wave) | ||||
| repetitiveness | 0.3 dB (2 σ) (30 Hz AC/DC 10% sine wave) | ||||
| measure speed | xyLv*3 | 5（4.5） 20（17） | 0.10-3.99cd/m2 2.00cd/m2or above | 5（4.5） 20（17） | 0.30-5.99cd/m2 6.00cd/m2or above |
| Scintillation contrast | 16 measurements per second (16 measurements per second) | ||||
| Scintillation JEITA | 0.5 measurements per second (0.3 measurements per second)※4 | ||||
| display | number | xyLv, XYZ, TΔuvLv, u'v'Lv, RGB 分析 The chromaticity value can be displayed up to 4 decimal places (or 3 decimal places can be selected for display) Flicker (contrast measurement method)※2 | |||
| simulation | ΔxΔyΔLv, R/G B/G ΔG, ΔR B/R G/R, Flicker (contrast method)※2 | ||||
| LCD | 2-line 16 bit display (with backlight) | ||||
| synchronous mode | NTSC, PAL, EXT, UNIV, INT | ||||
| Synchronous frequency range of the tested screen | Vertical synchronization signal: 40-200Hz (flicker: 40-130Hz) | ||||
| Number of memory channels | 100通道 | ||||
| Analyzer mode | standard functions | ||||
| interface | RS-232C (38400bps or below), USB（Rev.1.1） | ||||
| Multi probe expansion | Zui has 5 additional measurements (using 4 probe expansion boards CA-B14) | ||||
| software | CA SDK software (standard accessory) | ||||
| Working temperature/humidity range | Temperature: 0-40 degrees, relative humidity of 85% or below, no condensation | ||||
| Storage temperature range | -20-55 degrees, relative humidity of 85% or below (at 35 degrees), no condensation | ||||
| Input voltage range | 100–240V~, 50–60Hz, 50VA | ||||
| size | Host: 340 (W) × 127 (H) × 216 (D) mm, Measuring head: Ø 49 × 204mm | Host: 340 (W) × 127 (H) × 216 (D) mm, Measuring head: Ø 49 × 232mm | |||
| weight | Host: 3.58kg, probe: 520g | Host: 3.58kg, probe: 540g | |||
| working environment | Equipment type: 2; Pollution index: 2 | ||||
| Standard Accessories | AC power adapter, color analysis software CA-SDK, rubber sleeve CA-H10 | ||||
- ※1
- The measurement of chromaticity and brightness is carried out under the hardware conditions of Konica Minolta (using standard LCD). Specifications are subject to change without prior notice.
- ※2
- The CA SDK software supports measuring flicker (JEITA method).
- ※3
- The measuring probe can only be connected to the P1 port, using a USB interface (baud rate: 38400bps).
- ※4
- Measure using Konica Minolta's computer (P3-600MHz).
Similar Product Recommend
