-
E-mail
taili668@vip.163.com
-
Phone
13662293686
-
Address
13D, Building A2, the Pearl River River Plaza, No. 9009, Longxiang Avenue, Longgang District, Shenzhen
Product Categories
Shenzhen Taili Instrument Co., Ltd
Konica Minolta CS-100A Color Luminance Meter
NegotiableUpdate on 02/23
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Taili Instrument provides you with the Konica Minolta CS-100A color luminance meter, which measures the luminance and chromaticity of small light emitters such as LEDs, tungsten filament lamps and fluorescent lamps, surface colors of floors, walls, and objects that have just been sprayed and are difficult to touch, colors of complex shapes and surfaces that cannot be touched from a sanitary perspective, luminance and chromaticity of traffic signals, luminance and chromaticity of color televisions, luminance and chromaticity of black and white televisions, and luminance and chromaticity of television projectors
Product Details
Konica Minolta CS-100AColor luminance meter
- Measure the brightness and chromaticity of small light-emitting devices such as LEDs
- Measure the brightness and chromaticity of tungsten filament lamps and fluorescent lamps
- Measure the surface color of floor walls and objects that have just been sprayed and are difficult to touch
- Measure the color of complex shaped parts and surfaces of objects that cannot be touched from a sanitary perspective
- Measure the brightness and chromaticity of traffic signal lights
- Measure the brightness and chromaticity of a color television
- Measure the brightness of black and white television
-
Measure the brightness and chromaticity of a television projector
Konica Minolta CS-100AColor luminance meter
Can be placed in any position for use.
Lightweight and compact design, weighing only890g.（Battery not included）
Portable battery driven mode, easy to carry. It can be freely operated anywhere.Non contact measurement can be performed.
Adopting the DSLR method of aiming at the measured object in the viewfinder and focusing on the measurement, accurately measuring from a position away from the measurement area.
Transform the colors seen into numerical values.
The color of the visible reflector can be quickly measured.
It can measure small surfaces.
Measurable angle is small, with a diameter of14.4mm（The measurement distance is1,014mm）The following measuring objects. Additionally, if a close-up lens is installed（Sell separately）Can measure diameters smaller than1.3mm（measure distance205mm）A small object with a tiny surface area.
can pass throughRS-232CRealize bidirectional communication.
useRS-232CThe standard equipment for the interface can output measurement data and be controlled through a computer.
Built in colorimeter function.
Any reference color can be used（Can input numerical and measured values）Measure color difference. Color management is simple and easy to implement.
Can perform arbitrary benchmark calibration and manage instrument errors.
Users can perform benchmark light source calibration on their own, and when using multiple units of this product for measurement, it can eliminate indication errors near specific colors.
Can perform remote control operations and data processing.
If compared to a data processorDP-101（Sell separately）Connected for use, can be used“Measurement value printing”、“automatic measurement”、“statistics”Waiting for data processing work.
CS-100AIt is a portable non-contact digital color luminance meter for fixed-point DSLR lenses, which can measure luminance and chromaticity in a non-contact manner.
Konica Minolta CS-100AColor luminance meterparameter
| model | Colorimeter CS-100A |
|---|---|
| category | Single lens reflex point measuring colorimeter for measuring the chromaticity and brightness of light sources and object surfaces |
| Measurement angle | 1° |
| optical system | 85mm f/2.8 lens; SLR observation system; Less than 1.5% suppression of stray light |
| perspective | 9 ° and indicate a measurement angle of 1 ° |
| focusing distance | 1014mm to infinity |
| sensor | Three silicon optical components with color filters, measuring the tristimulus values of red, green, and blue |
| Spectral sensitivity | Conforms to the CIE 1931 standard observer color matching curve |
| measure time | FAST: Sampling time: 0.1s, display time: 0.8-1.0s; SLOW: Sampling time: 0.4s, display time: 1.4-1.6s |
| luminance unit | cd/m2Or fL (adjustable) |
| measurement range | FAST：0.01~299,000cd/m2(0.01~87,530fL)； SLOW：0.01~49,900cd/m2(0.01~14,500fL) |
| precision | Brightness (Y): Display value within ± 2% ± 1 value Chromaticity (x, y): ± 0.004 (Standard A light source, measured at a temperature of 18-28 ° C/64-82 ° F) |
| repetitiveness | Brightness (Y): Display value within ± 0.2% ± 1 value Chromaticity (x, y): FAST：Y 100cd/m2Or higher: ± 0.001; 48.1～99.9cd/m2：±0.002； Below 48.1cd/m2: Below the measurement range SLOW：Y 25.0cd/m2Or higher: ± 0.001; 12.0～24.9cd/m2：±0.002； Below 12.0cd/m2: Below the measurement range (Standard A light source) |
| target value | 1 group, input from measured values or numerical values |
| Measurement Mode | Value, Yxy； Color difference: Δ (Yxy) |
| Standard observer perspective | 2° |
| display | External display: LCD; Three measurement values (Y, x, and y) with three significant digits, with additional explanation provided Observation window: 3-digit LCD (displaying brightness value Y) with LED backlight display |
| data transmission | RS-232C； Baud rate: 4800bps |
| external control | The measurement process can be controlled by external devices |
| power supply | One 9V battery; It can also be powered through the data output port |
| Working environment conditions | Temperature: 0-40 ° C (32-104 ° F); relative humidity of 85% or lower No condensation (at 35 ° C/95 ° F) Installation type: II, pollution level: 2 |
| Storage temperature range | -20-55 ° C (-4-131 ° F); relative humidity of 85% or lower No condensation (at 35 ° C/95 ° F) |
| size | 79 × 208 × 154mm |
| weight | 890g without battery |
| Standard Accessories | Lens cap; Eyepiece cover; Protective filter, ND eyepiece filter; 9V battery; box |
Specifications are subject to change without prior notice.
| model | Colorimeter CS-100A |
|---|---|
| category | Single lens reflex point measuring colorimeter for measuring the chromaticity and brightness of light sources and object surfaces |
| Measurement angle | 1° |
| optical system | 85mm f/2.8 lens; SLR observation system; Less than 1.5% suppression of stray light |
| perspective | 9 ° and indicate a measurement angle of 1 ° |
| focusing distance | 1014mm to infinity |
| sensor | Three silicon optical components with color filters, measuring the tristimulus values of red, green, and blue |
| Spectral sensitivity | Conforms to the CIE 1931 standard observer color matching curve |
| measure time | FAST: Sampling time: 0.1s, display time: 0.8-1.0s; SLOW: Sampling time: 0.4s, display time: 1.4-1.6s |
| luminance unit | cd/m2Or fL (adjustable) |
| measurement range | FAST：0.01~299,000cd/m2(0.01~87,530fL)； SLOW：0.01~49,900cd/m2(0.01~14,500fL) |
| precision | Brightness (Y): Display value within ± 2% ± 1 value Chromaticity (x, y): ± 0.004 (Standard A light source, measured at a temperature of 18-28 ° C/64-82 ° F) |
| repetitiveness | Brightness (Y): Display value within ± 0.2% ± 1 value Chromaticity (x, y): FAST：Y 100cd/m2Or higher: ± 0.001; 48.1～99.9cd/m2：±0.002； Below 48.1cd/m2: Below the measurement range SLOW：Y 25.0cd/m2Or higher: ± 0.001; 12.0～24.9cd/m2：±0.002； Below 12.0cd/m2: Below the measurement range (Standard A light source) |
| target value | 1 group, input from measured values or numerical values |
| Measurement Mode | Value, Yxy； Color difference: Δ (Yxy) |
| Standard observer perspective | 2° |
| display | External display: LCD; Three measurement values (Y, x, and y) with three significant digits, with additional explanation provided Observation window: 3-digit LCD (displaying brightness value Y) with LED backlight display |
| data transmission | RS-232C； Baud rate: 4800bps |
| external control | The measurement process can be controlled by external devices |
| power supply | One 9V battery; It can also be powered through the data output port |
| Working environment conditions | Temperature: 0-40 ° C (32-104 ° F); relative humidity of 85% or lower No condensation (at 35 ° C/95 ° F) Installation type: II, pollution level: 2 |
| Storage temperature range | -20-55 ° C (-4-131 ° F); relative humidity of 85% or lower No condensation (at 35 ° C/95 ° F) |
| size | 79 × 208 × 154mm |
| weight | 890g without battery |
| Standard Accessories | Lens cap; Eyepiece cover; Protective filter, ND eyepiece filter; 9V battery; box |
Specifications are subject to change without prior notice.
Similar Product Recommend
