Juice tea beverage production line

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Washing, Filling, and Capping 1. Overview: Bottles are transported by the bottle air delivery system to the three in one filling machine through the bottle shifting star wheel

Product Details

rinse

filling

screw cap

1、 Overview

The bottles are transported to the three in one filling machine by the bottle air delivery system through the bottle shifting star wheel. The bottle washing machine is equipped with a bottle clamp on the turntable, which clamps the bottle mouth and flips it 180 ° along a guide rail to make the bottle mouth downward. In a specific area of the bottle flushing machine, the nozzle sprays disinfectant or water to flush the inner wall of the bottle. After rinsing and draining, the bottle is clamped by the bottle clamp and flipped 180 ° along the guide rail to make the bottle mouth face upwards.

The cleaned bottles are exported by the bottle washing machine through the bottle shifting star wheel and transferred to the small bottle filling machine. The bottles entering the small bottle filling machine are held at the bottle mouth by the bottle plate. The filling valve is lowered and raised by the valve lifting mechanism under the action of a cam.

After the filling valve descends and touches the bottle mouth, it opens to complete the filling process. After the filling is completed, the filling valve rises and leaves the bottle mouth, and the bottle enters the capping machine through the bottleneck transition wheel.

The anti rotation knife on the capping machine locks onto the bottleneck, keeping the bottle upright and preventing rotation. The capping head keeps revolving and rotating on the capping machine, and under the action of the cam, it achieves the actions of grabbing, covering, screwing, and removing the capping, completing the entire capping process. The finished bottles are transferred from the capping machine to the bottle conveyor chain through the bottle dispensing wheel, and then transported out of the three in one small bottle filling machine by the conveyor chain. The entire equipment is enclosed by a sealed window, with the height of the sealed window higher than the equipment point. There are appropriate passages left at the bottle inlet and outlet, and an exhaust duct is left at the bottom of the sealed window.

rack

1) The rack is welded from high-quality carbon steel and undergoes surface rust prevention treatment and spraying. The surface is covered with stainless steel plate (AISI304).

2) The transmission system of the three in one machine is located under the rack surface, and is driven by another main motor using gear transmission.

3) The transmission gears are arranged in a cross pattern between steel gears and nylon gears.

4) The main motor output shaft is equipped with an overload protection mechanism to effectively ensure machine safety.

Equipment Configuration List

serial number	Name	Remarks
1	main motor	Wannan Motor
2	cylinder	Airtac
3	PLC	Mitsubishi
4	touch screen	wiling
5	frequency converter	Mitsubishi

Product Parameters

/PARAMETER

model	RCGF8-8-3	RCGF14-12-5	RCGF18-18-6	RCGF24-24-8	RCGF32-32-10	RCGF40-40-12	RCRGF50-50-15
Number of bottle washing heads	8	16	18	24	32	40	50
Number of filling heads	8	12	18	24	32	40	50
Number of sealing heads	3	6	6	8	10	12	15
Rated output (500ml)	2500 bottles	4000 bottles	6000 bottles	10000 bottles	12000 bottles	16000 bottles	24000 bottles
Installed capacity (KW)	3	3.5	4	4.8	7.6	8.3	9.6
Dimensions: Length x Width x Height (mm)	1900×1420×2000	2200×1600×2300	2450×1900×2300	2750×2180×2400	4000×2300×2300	4550×2650×2300	5450×3210×2300