JJ-2 high-speed tissue crusher

NegotiableUpdate on 03/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

JJ-2 high-speed tissue crusher is suitable for crushing biological, chemical, plant, nutrient and other experiments in scientific research, medical treatment, chemical pharmaceuticals, biological products, food processing, etc. Used for mixing liquids or liquid-solid mixtures in the laboratory. A grinder utilizes high rotational speed to thoroughly crush items.

Product Details

JJ-2 high-speed tissue crusherApplication fields:
Scientific research: Biochemical, plant, nutritional and other research can all be carried out using this machine for crushing.
Medical treatment: Both laboratory and drug can be used, especially suitable for tissue therapy drug crushing.
Chemical and pharmaceutical industries: mixing of gelatinous emulsions and solid liquid substances, such as blending of oil-based erythromycin agents, manufacturing of concentrated beef liver mash, etc.
Biomanufactured products: During the manufacturing process of biopharmaceuticals, all utensils must be tightly disinfected to prevent bacterial infection, and the structure must meet the requirements of aseptic operation.
Food industry: can be used to manufacture meat sauce, cheese, etc. for stirring and crushing.
JJ-2 high-speed tissue crusherTechnical Specifications:
1. Motor: Vertical single-phase series excited motor
2. Rated power: 120W
3. Working voltage: 220V
4. Frequency: 50Hz
5. Speed: 0~8000~12000 revolutions per minute
Precautions for use:
1. First, match the blade shaft with the machine shaft, then move the connector spring element downwards into the slot of the ruler (move it downwards enough to touch the step firmly) before the machine can start running smoothly.
Before starting up, it is necessary to pay attention to whether the voltage on the power supply matches that on the motor.
3. The carbon brush should be checked regularly. If it is too short, a new carbon brush should be replaced. If abnormal sparks are found on the carbon brush, it should be stopped immediately. The cause of the obstacle should be checked and repaired before use to avoid burning out the rectifier and coil.
4. Due to the high motor speed, continuous use may cause the motor to burn out. Therefore, the usage time is limited to three minutes and can only be used after stopping for five minutes.
5. The glass cup device must be aligned with the machine's circular axis, centered, and not shaken on all sides before it can be turned on.
6. The machine should not run idle, and a small amount of liquid or grease must be added during use.
7. When adding materials, they should be added slowly, first in slow mode and then in fast mode. However, slow mode can only be used for starting and should not be frequently used