Electric heating constant temperature digestion instrument

1、 Introduction:Electric heating constant temperature digestion instrumentIt is a new type of constant temperature heating equipment produced and designed by our factory according to modern laboratory requirements. It adopts a microcomputer controlled metal bath device to replace the traditional water bath, and can be widely used for sample preservation and reaction, DNA amplification and electrophoresis pre denaturation, serum coagulation, etc. At the same time, different modules can be configured according to user needs

IIElectric heating constant temperature digestion instrumentFeatures:

1. Adopting a microcomputer temperature controller with high temperature control accuracy;

2. LED digital display, real-time temperature display, time decreasing display;

3. Equipped with temperature error accuracy function;

4. Automatic fault detection and alarm function;

5. After the scheduled time is completed, the buzzer will remind and stop heating;

6. Built in over temperature alarm function, making experiments safer;

7. Pt100 platinum resistance sensor with high sensitivity;

3、 Technical reference

• model	DTD-25
  Temperature control range	Room temperature -300.0 ℃
  heating power	600W
  temperature control accuracy	±1℃
  temperature fluctuation	±0.2℃
  temperature uniformity	≤±0.5℃
  warm-up time	≤ 25 minutes (from 20 ℃ to 100 ℃)
  timing range	1min-99h59min or normally open
  Module material	aluminum material
  aperture	Φ 26mm × 60 × 18 holes
  power supply	220v 50Hz

• 5、 6 major features:

  1. Surrounding heat transfer method, fast digestion speed, high efficiency, and energy saving
  2. The cooling system of * ensures that the shell temperature is below 38 ℃, resulting in a longer service life and greater safety
  3. Thermal insulation performance *, can maintain insulation for up to 5 hours after power failure
  4. Fast heating rate, reaching 150 ℃ in 15 minutes, uniform temperature
  5. Adopting a new temperature control program and heating method to truly reduce the temperature difference between holes to less than ± 0.5 ℃
  6. The foolproof operating program is easier to learn and safer to use.

•