Hot flow switch MX-LL-116-08

Principle characteristics
Based on the thermal principle, the sealed probe contains two resistors, one of which is heated as the detection resistor and the other is not heated as the reference resistor. When the medium flows, the heat on the heating resistor is carried away, and the resistance value is changed. The difference between the two resistors is used as the basis for judging the flow rate.
No moving parts, maintenance free, easy to install, one model suitable for various pipe diameter requirements, continuously adjustable switch quantity, extremely low pressure loss, compact structure, LED display of flow trend and switch status.
Product Application
Gas liquid dual-use type, can be used for pneumatic and hydraulic systems, can be used for cut-off detection of circulating water, cutting fluid and lubricating oil, as well as pump idle protection.
Model Description: MX-LL-116-08
Flow range: 0-100L/Min. 0-60L adopts small threads; 60-100L adopts large thread
Accuracy range: ± 5% of total range
Delayed release explanation: depends on the switch point; Minimum 0.6L/min
Set scale: Calibrate when the medium is water, at room temperature, and in a horizontal installation state. Location, medium, and temperature have an impact on the set value.
Pressure resistance specification: 100bar (stainless steel shell)
Material Description: Shell: Stainless Steel; Piston: POM plastic; Spring: stainless steel; Sealing: NBR
Medium temperature: customized
Power supply mode: 24V ± 20% DC (E1); 220V±15%AC（E2)
Signal output: switch quantity
Connection method: threaded connection; flange connection