EtherCAT Master to Profinet Gateway

EtherCAT main station to Profinet (XD-ECPNM20) gateway connects Profinet (S7-400/1200/1500) protocol functions, enabling EtherCAT interface instruments, frequency converters, comprehensive protection, soft starters, servos, valves and other equipment to access PROFINET network systems such as S7-1200, S7-1500, CPU15-2PN/DP, S7-400, etc.EtherCAT Master to Profinet
The gateway on one side of PROFINET is a PROFINET slave, and on the other side it supports EtherCAT master to connect over 30 servos.

Product Features

1，XD-ECPNM20The gateway realizes the function of converting EtherCAT master to Profinet slave,XD-ECPNM20The Profinet communication port of the gateway serves as a Profinet slave interface and is compatible with various master controllers that support the Profinet protocol. The EtherCAT communication port is used to connect EtherCAT slave devices, which can directly control EtherCAT slave devices or connect to the master station on the EtherCAT bus to control a lower level network;

2， The length of IO data can be adjusted according to actual applications. The data of two communication ports can be mapped arbitrarily according to bytes;

3，XD-ECPNM20The communication port of the gateway controller provides protection for network isolation. By connecting to the integrated switch, star, ring, and line network topologies can be achieved; Both communication ports run protocols independently of each other, exchanging IO data through data caching, with a data processing time of 5-10ms cycle;

4Support SDO, convenient for monitoring and debugging;

5，XD-ECPNM20The gateway supports USB interface for debugging and diagnosis;

6Through WEB configuration, the interface is simple and friendly, and PDO configuration can be easily completed in just a few steps, supporting SDO read and write;

7Supports 20 axis EtherCAT bus motion control and 32 EtherCAT slave stations (including servo axes).

PROFINET&ETHERCATTechnical Specifications

PROFINET Technical Parameters

The gateway, as a device device (i.e. slave) of ProfiNet network, comes with 2 RJ45 Ethernet interfaces, supports 100BASE-TX, MDI/MDIX self detection, integrates Ethernet switches, can form a chain network, and supports ring network redundancy.

Adapt to ProfiNet V2.3 protocol, adopt real-time (RT) communication function, and comply with GB/T 25105-2014 "Industrial Communication Network Fieldbus Specification Type 10: PROFINET IO Specification", IEC 61158-5-10：2007，IDT。

The input/output quantity of PROFINET can be freely set, and the supported data length is: input ≤ 500 bytes, output ≤ 500 bytes, input+output ≤ 1000 bytes.

ETHERCAT Technical Parameters

As a slave station of the EtherCAT network, the gateway can connect various manufacturers' EtherCAT equipped servos, frequency converters, instruments, motors, encoders, valves, etc.

Equipped with one RJ45 Ethernet interface, supporting 100BASE-TX, MDI/MDIX self detection.

The supported PDO length is 512 bytes for inputs and outputs. The direction of input and output is the main station direction, where input is the main station input and output is the main station output.

Electrical parameters
Power supply voltage: DC 24V/200mA (18V~30V available), it is recommended to connect the protective grounding PE during use
● Environmental temperature: Transportation and storage: -40 ℃~+85 ℃, working temperature: -40 ℃~+75 ℃
Relative humidity at work: -25~55 ℃, humidity ≤ 95%
● Dimensions:118mm (width) × 143.2mm (height) × 33.5mm (thickness)；
Installation method: 35mm guide rail;
● Protection level: IP20;
Weight: Approximately 500g.