-
E-mail
2962142189@qq.com
-
Phone
15630771252
-
Address
The first 106 National Highway in Xian County, Cangzhou City, Hebei Province
Product Categories
- Electrical conduit bending testing machine
- Electrical conduit bending device
- Freeze thaw mold set
- Bucket pressure tester
- Oil paste construction degree tester
- Steel structure needle thickness gauge
- Hollow glass dew point meter
- Concrete Instrument
- Asphalt Instrument
- Geotextile Instrument
- Cement Instrument
Hebei Yaoyang Instrument Equipment Co., Ltd
Electrical conduit bending fixing device, plastic pipe 90 degree bending bracket
NegotiableUpdate on 01/23
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Electrical conduit bending fixing device, plastic pipe 90 degree bending bracket, plastic pipe 90 #176; The bending experimental device is used for rigid insulation material flat conduits with outer diameters of 16mm, 20mm, and 25mm, and a length of 500mm. Without bending aids, they can be bent into 90 ° C; #176; Perform bending test at the corner. Meets the requirements of GB/T14832.2 "Special Requirements for Conduits for Electrical Installation - Rigid Insulated Material Flat Conduits" and JG3040 "Insulated Electrical Sleeves and Accessories for Buildings". $r $n $r $n 2. Electrical conduit bending and fixing device, plastic pipe 90 degree bending bracket bending and fixing device, technical parameters:
Product Details
The plastic tube 90 ° bending test device is used for rigid insulation material flat conduits with outer diameters of 16mm, 20mm, and 25mm, with a length of 500mm. The bending test is conducted after bending at a 90 ° angle without bending aids. Meets the requirements of GB/T14832.2 "Special Requirements for Conduits for Electrical Installation - Rigid Insulated Material Flat Conduits" and JG3040 "Insulated Electrical Sleeves and Accessories for Buildings". This device is lightweight, structurally efficient, easy to operate, and has become increasingly widely used.
IIBending fixing deviceTechnical Specifications:
1. Bending angle: 90 °
2. Fixed card spacing: 50mm
3. Experimental temperature: 60 ℃± 2 ℃
4. Dimensions: 256 * 256 * 49mm
5. Weight (gross): 8.8Kg
6. Model: JG3050-13
The plastic tube 90 ° bending test device is used for rigid insulation material flat conduits with outer diameters of 16mm, 20mm, and 25mm, with a length of 500mm. The bending test is conducted after bending at a 90 ° angle without bending aids. Meets the requirements of GB/T14832.2 "Special Requirements for Conduits for Electrical Installation - Rigid Insulated Material Flat Conduits" and JG3040 "Insulated Electrical Sleeves and Accessories for Buildings". This device is lightweight, structurally efficient, easy to operate, and has become increasingly widely used.
IIBending fixing deviceTechnical Specifications:
1. Bending angle: 90 °
2. Fixed card spacing: 50mm
3. Experimental temperature: 60 ℃± 2 ℃
4. Dimensions: 256 * 256 * 49mm
5. Weight (gross): 8.8Kg
6. Model: JG3050-13
The plastic tube 90 ° bending test device is used for rigid insulation material flat conduits with outer diameters of 16mm, 20mm, and 25mm, with a length of 500mm. The bending test is conducted after bending at a 90 ° angle without bending aids. Meets the requirements of GB/T14832.2 "Special Requirements for Conduits for Electrical Installation - Rigid Insulated Material Flat Conduits" and JG3040 "Insulated Electrical Sleeves and Accessories for Buildings". This device is lightweight, structurally efficient, easy to operate, and has become increasingly widely used.
IIBending fixing deviceTechnical Specifications:
1. Bending angle: 90 °
2. Fixed card spacing: 50mm
3. Experimental temperature: 60 ℃± 2 ℃
4. Dimensions: 256 * 256 * 49mm
5. Weight (gross): 8.8Kg
6. Model: JG3050-13
Electrical conduit bending fixing device, plastic pipe 90 degree bending bracketThe plastic tube 90 ° bending test device is used for rigid insulation material flat conduits with outer diameters of 16mm, 20mm, and 25mm, with a length of 500mm. The bending test is conducted after bending at a 90 ° angle without bending aids. Meets the requirements of GB/T14832.2 "Special Requirements for Conduits for Electrical Installation - Rigid Insulated Material Flat Conduits" and JG3040 "Insulated Electrical Sleeves and Accessories for Buildings". This device is lightweight, structurally efficient, easy to operate, and has become increasingly widely used.
IIElectrical conduit bending fixing device, plastic pipe 90 degree bending bracketBending fixing deviceTechnical Specifications:
1. Bending angle: 90 °
2. Fixed card spacing: 50mm
3. Experimental temperature: 60 ℃± 2 ℃
4. Dimensions: 256 * 256 * 49mm
5. Weight (gross): 8.8Kg
6. Model: JG3050-13
Similar Product Recommend
