Digital display tensile strength testing machine

NegotiableUpdate on 02/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The digital tensile strength testing machine is mainly suitable for testing the tensile and compressive tests of various materials. In tensile testing, technical indicators such as Z-bearing tensile strength, tensile strength, elongation deformation, and elongation rate of the material are tested; In compression testing, technical indicators such as bearing pressure, tensile strength, and Z-large compression deformation of the material are tested.

Product Details

The digital tensile strength testing machine is mainly suitable for testing the tensile and compressive tests of various materials.

Model: TSI005

1、 Scope of application:

In tensile testing, technical indicators such as maximum load-bearing capacity, tensile strength, elongation deformation, and elongation rate of the material are tested;

In compression testing, technical indicators such as bearing pressure, tensile strength, and maximum compression deformation of the material are tested.

The above detection parameters are automatically calculated by the main controller based on the test parameter conditions set at the beginning of the experiment after the experiment is completed, and the corresponding test results are displayed. Each detection parameter can be printed or saved in the controller for query and display after the experiment is completed.

2、 Instrument specifications:

project	Specifications
The most powerful experimental force	500N
The smallest reading value of displacement	0.01mm
Relative error of indication	±1%
Test force indication repeatability relative error	≤1%
Relative error of zero point of experimental force	±0.1%FS
speed range	1-500mm/min
Experimental space	600mm (excluding fixtures)
loading method	electric
Power supply voltage (must have reliable grounding measures)	～220V±10% 50Hz

3、 Working principle:

1. Mechanical structure and working principle:

This machine adopts electric loading method, and the bottom is the structural support bracket of the whole machine, which contains components such as motor driver, loading motor, reduction system, power transmission mechanism, etc;

The upper part is the specimen clamping and force value, deformation measurement mechanism, which includes the main components such as loading transmission mechanism, specimen stretching fixture, specimen compression fixture, force sensor, displacement sensor, etc.

2. Electrical structure and working principle:

The electrical part consists of a display measurement control part. The display measurement control part realizes various functions such as control, display, data acquisition, and processing. The main controller can select tensile, stiffness, and compression test modes according to different test requirements, and set the sample parameters for each test mode. After adjusting the sample, press the test button, and the system will automatically start the test. Based on the corresponding test conditions, the system will automatically determine the shutdown process and display the corresponding test results.

4、 Equipment features:

1. Fully open parameter settings

2. Set parameters * Save, automatically read and display on next startup

3. Floating zero point setting, adjustable zero point at any time

4. Peak retention and storage, constant value following;

5. Within the effective speed range, the speed value can be set arbitrarily;

6. Quick speed switching function during the movement of the crossbeam

7 flexible data query and display functions;

8. Overload shutdown and audio alarm protection function;

9. Automatic judgment function at the end of the experiment;

10. Extreme position protection, etc.