DN400 * 400mm stainless steel electric plug valve

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Display 1: DN400 * 400mm Stainless Steel Electric Plug in Valve Product Brief Introduction Plug in Valve is divided into electro-hydraulic plug in valve, electric plug in valve, and pneumatic plug in valve according to the drive. Plug in valve has a simple structure, low failure rate, easy maintenance, and wide use

Product Details

Product Display

1DN400 * 400mm stainless steel electric plug valveProduct Introduction
slide gate valveDivided by drive into electro-hydraulic plug-in valveElectric plug-in valve、pneumatic knife gate valveThe plug-in valve has a simple structure, low failure rate, easy maintenance, and is widely used. Electro hydraulic push rods, electric actuators, or cylinders can be used as driving mechanisms. According to the interface form, it is divided into square plug valve, circular plug valve, split type and sealed plug valve.
slide gate valveWhen applied to highly corrosive or high-temperature conditions, the valve material must be replaced and the lining added. When used in explosion-proof places, explosion-proof electro-hydraulic push rods or other explosion-proof series pneumatic and electric power sources can be selected.

IIDN400 * 400mm stainless steel electric plug valveBasic Parameter Table

Common name:Electric plug-in valve、pneumatic knife gate valve	Power supply voltage:380V, 50Hz (customizable)
Operating Temperature≤450℃	Pressure environment: normal pressure0.05~0.25Mpa
Main material: Carbon steel (customizable)	Material particle size: particles, dust, gas
Connection form: Square/Circular flange	Drive mode: electro-hydraulic, electric, pneumatic

IIIDN400 * 400mm stainless steel electric plug valveProduct Features:

Lightweight: about one-third that of cast iron gates;
Corrosion resistance: resistant to acid, alkali, and most corrosive chemicals, as well as sewage and seawater;
Good sealing performance: Rubber is used to seal the metal, and the water stop rubber ring is a hollow structure with good sealing performance;
Small torque: Due to the light weight of the door panel, the friction resistance between the door panel and the guide rail is small, so the manual torque is not greater than100N
Structure: Adopting reliable temperature and steel plate welding structure, high-performance sealing components ensure effective opening and closing of the gate, and wedge block design makes gate opening and closing more reliable and able to withstand large reverse water levels;
Long lifespan: Due to the limited contact between the door panel and the guide rail during sealing, the wear on the sealing surface is very small.
Easy maintenance: The wedge block can be adjusted. After years of use, if there is local leakage, simply adjust the wedge block to increase the compression of the water stop rubber ring, saving time and effort, and reducing maintenance costs;
Opening and closing machine: manual, pneumatic, electric, electro-hydraulic, and hydraulic can be selected according to different conditions;
Easy installation: The gate frame is fixed by secondary concrete pouring, which is convenient and reliable.