XMZ/T series digital display regulator intelligent digital display instrument

XMZ/T series digital display regulator
I. Overview
The XM series digital display regulator is produced according to standards and adopts a novel circuit design and structural form. Make its structure and wiring very simple, therefore it has high reliability, good seismic resistance, low power consumption, long service life, simple use, and easy maintenance.
Its characteristics are: using 20mm (0.8 inches) or 12.5mm (0.5 inches) digital display, clear reading, no parallax, high accuracy, easy observation, sensitive temperature measurement, good stability, strong earthquake resistance, good anti-interference ability and other advantages.
The external dimensions, installation dimensions, and wiring of this instrument are consistent with the XC series dynamic coil display regulator, providing convenience for users to update and upgrade their instruments.
This instrument is suitable for measuring and controlling various parameters in industrial processes. It can be used in conjunction with the following sensors and transmitters or receive the following signals, and display the measured physical quantities directly with numbers.
a. Thermocouple
b. Sensors that generate changes in thermocouple and resistance
c. Hall pressure transmitter or sensing transmitter that generates DC voltage changes
d. Resistance remote transmission pressure gauge
e. Standardized analog DC electrical signals or other DC signals

2、 Main technical indicators
1. Type: Plate mounted (there are three types: horizontal, vertical, and square)
2. Display mode: 3 (1/2) LED digital display, large reading ± 1999
3. Basic error: ± 0.5% FS (FS is full scale)
4. Resolution: 0.1 ℃ below ± 200 ℃, 1 ℃ above ± 200 ℃
5. Zero drift: The zero drift within one hour is less than one-fifth of the basic error.
6. Continuous operation: After 24 hours of continuous operation, the error of the instrument is still less than the basic error.
7. Dimensions: 160 × 80 × 180/270mm 96 × 96 × 150/210mm 72 × 72 × 135mm
8. Hole size: Horizontal: 152 × 76mm Vertical: 76 × 152mm Square meter: 92 × 92mm 68 × 68mm
9. Power supply voltage: AC 220+10/-15V, power supply frequency 50 ± 2Hz
10. Environmental temperature: 0-50 ℃
11. Relative humidity: ≤ 85%
12. Position based control: The set range is the full range, and the control error is less than ± 0.5% FS
Output contact capacity: 220V, 3A AC non inductive load.
Note: In the three position setting, the lower limit setting cannot exceed the upper limit setting.
13. Constant current output: 0-10mA load is 0-1K Ω, 4-20mA load is 0-500 Ω, and the output accuracy is less than ± 0.5% FS.
14. Power consumption: less than 5W
15. Weight: Approximately 1 kilogram