Whole vehicle (car) rain shelter

NegotiableUpdate on 02/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The car rain test simulates the intensity of rain in a natural state to test the sealing performance of cars, such as glass, sunroof, doors, etc

Product Details

The car rain test simulates the intensity of rain in a natural state to test the sealing performance of cars, such as glass, sunroof, doors, etc. The waterproof reliability experiment mainly consists of systems such as rain exposure, air drying, and lighting.
【 Compliant with standards 】
◇ GB/T12480
◇ QC/T476
◇ QC/T453

The outer shell and inner liner of the equipment are made of color steel plates with a thickness of 0.7mm. There is insulation in the middle, and the medium is polyurethane. There are large doors on the front and rear sides for easy access by cars.
The rain laboratory consists of an external maintenance room, sprinkler system, circulating water pumping system, control system, and maintenance system.
The laboratory operating system and control system are installed in the operation control room, located on the side of the studio.
Water Supply System and Water Treatment
1. The water storage tank is located outside the laboratory, and the water supply system is located above the tank.
2. The water supply system is equipped with stainless steel pressure pumps as water pumps; Pressure gauge; Composed of intelligent flow meters.
3. Water treatment system: mainly composed of sedimentation tank, purification and filtration device, and sewage pump.
4. Sedimentation, filtration, and purification treatment should be carried out on the recycled water to ensure that the effluent quality meets the recycled water standards specified in GB8978-1996.
Suspended solids: ≤ 20mg/L
PH value: 6.8-8.5
Turbidity: ≤ 10ppm
Particle size: ≤ 10 μ m
Control System
The digital touch screen programmable controller is used to complete the time and sequence control of the entire system, effectively ensuring that the test is conducted according to standards.
Performance indicators of rain chamber test
1. Spray aperture: diameter 2.5-3mm
2. Nozzle angle: Except for the rain shower column on the roof of the cabin, which is in the direction of a plumb bob, the spray angle in other directions is 45 ° (adjustable)
3. Spray hole spacing density: 400 * 400mm
4. Rainfall intensity: 5-7mm/min, 8-12mm/min
5. Spray pressure: 150 ± 10Kpa (adjustable)
6. Nozzle outlet angle: 60 ° conical shape
7. Rain exposure time: adjustable from 0 to 9999 minutes
8. Rain intensity: manually adjustable
9. Pressure gauge: 1.5 level accuracy, dial diameter of 100, 0-5kg/cm2
10. Rainy areas: front, back, left, right, top, bottom six sided spray
11. The distance between the nozzle and the vehicle surface is 700 ± 200mm