-
E-mail
hbdgyx@huangbeng.com
-
Phone
18005590168
-
Address
Building 6, Science and Technology Innovation Park, No. 12, Fengshan Road, Jiulong Industrial Park, Tunxi District, Mount Huangshan City, Anhui Province
Product Categories
Mount Huangshan Huangpu Single Screw Pump Co., Ltd
WA type small square open mouth pump
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
WA type small square open mouth pump small square hopper design, high economy, capable of conveying slow flowing and paste like media. Flow range: ≤ 100m ³/h, working pressure: ≤ 4.8Mpa. Conveying medium: capable of conveying slow flowing and paste like media
Product Details
Product advantages
- Small square hopper design, high economy
- Can transport slow-moving and paste like media
- Continuous low pulsation conveying
- No compression and low shear
- The conveying capacity is proportional to the rotational speed
- High pumping efficiency
- High pressure valve free conveying
- Easy to maintain and repair
-
Compression chamber designHigh viscosity medium passing through compression chamber
Obtain faster flow rate
Convenient and better access to the stator cavity -
Non penetrating spiral blade structureSqueezing with the pump chamber, it can push slow-moving and paste like media into the sealing chamber of the stator and rotor -
Design of Flow Guide Angle for Compression ChamberPrevent hygiene blind spots
Causing material accumulation
product structure
rotor
Can be paired with various materials and surface treatment solutions such as 40Cr, 304, 316L, 2205, etc
N-type geometric shape
The standard lead design of the rotor shows an increase in pressure for rotors of the same specifications
L-shaped geometric shape
Long lead design of rotor, extended sealing line, and increased flow rate of rotors of the same specifications
T-shaped geometric shape
The rotor has a geometric shape of a three headed spiral, and rotors of the same specification increase flow rate while considering high-pressure conditions
stator
Can be paired with various rubber solutions such as NBR, SBR, EPDM, HNBR, FKM, etc
Anti slip design
The rubber sealing rings at both ends of the stator are wrapped around the steel sleeve and formed as a whole to prevent the stator steel pipe from coming into contact with the medium and being corroded and slipping off
N-type geometric shape
Stator standard lead design, equivalent specifications show an increase in pressure
L-shaped geometric shape
Stator long lead design, extended sealing wire, and increased flow rate for rotors of the same specifications
T-shaped geometric shape
The stator has a three headed spiral geometry, and the flow rate of the same specification stator increases while considering high pressure conditions
Imported cavity
Small rectangular feeding hopper design, hopper size can be customized according to on-site requirements
Compression chamber
The high viscosity medium obtains faster flow velocity through the compression chamber, and the material enters the fixed rotor sealing chamber more fully
Rinse interface
Convenient for shutdown flushing and water replenishment lubrication during restart
Spiral propeller
Composed of a universal joint fork assembly and a spiral blade device, it ensures that the material can be smoothly pushed into the sealing chamber of the fixed rotor
Multiple materials to choose from
Multiple materials to choose from, non penetrating spiral blade structure, capable of pushing and stirring functions
Enhanced design
Equipped with reinforced cross universal joint structure, with stronger load capacity
Segmented structure
The split design of the universal joint fork assembly and the spiral blade device reduces maintenance costs
shaft seal
Different shaft seal schemes and various sealing flushing system schemes can be selected according to the medium
packing seal
The medium conveyed by the hopper pump often has a high viscosity, and the use of packing for sealing results in a higher overall cost-effectiveness
mechanical seal
Different materials and forms of mechanical seals can be selected according to customer needs and medium conditions
drive
Equipped with a standard deceleration motor drive, it reduces the speed while increasing the starting torque. The open shaft end can be connected to various types of drives
Product Parameters
| Brand: Yellow Pump | Origin: Mount Huangshan, Anhui |
| Flow range: ≤ 100m ³/h | Work pressure: ≤ 4.8Mpa |
| Temperature range: 150 ℃ | Conveying medium: capable of conveying slow-moving and paste like media |
| Installation method: Standard base and anchor bolts | Drive mode: Reduction motor |
noteThe above parameters are for reference only and are subject to change without prior notice
