Used 15 square titanium condenser

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The big difference between titanium condenser and stainless steel condenser is not in weight, nor is it the original intention of using titanium material. The main reason for using titanium tubes or materials is that titanium has much better anti-corrosion performance than 304, as well as high temperature and low temperature resistance. Used 15 square titanium condenser

Product Details

The block hole graphite heat exchanger has powerful functions, strong environmental friendliness, high structural strength, strong temperature and pressure resistance, excellent impact resistance, small size, high utilization rate, and is easy to maintain. It can be used as an evaporator, heater, cooler, condenser, reboiler, etc. in industrial production. In production and manufacturing, the cylindrical heat exchange block in the block hole graphite heat exchanger equipment adopts standard unit blocks with high structural strength. The structure does not use binders but uses polytetrafluoroethylene O-ring sealing medium. A pressure spring is installed as an automatic compensation mechanism for thermal expansion and contraction. The water hole is directly connected from one side to the other, and the material hole is covered with heat exchange blocks to improve material utilization. The allowable temperature is -20 ℃~165 ℃. Allowable pressure: 0.4MPA longitudinally, In the production process, standard components are assembled in a modular manner, which is convenient for installation and maintenance. No adhesive is used, which can increase the operating temperature and extend the service life.

The graphite heat exchanger equipment mainly consists of a shell and a core. The shell is made of steel plate, round steel, and flange as raw materials, which are cut and welded. The core is made of graphite as raw material, which is cut, machined, drilled, dried, impregnated, cured (dried), and trimmed. Before impregnation, the graphite needs to be dried and the steel needs to be welded. Then, the shell and core are assembled and pressure tested to be qualified, which is the finished product. The graphite heat exchange block is a standard part with two channels that are not connected to each other processed on an impermeable graphite block. The material flowing through the two channels transfers heat through the partition wall remaining on the graphite block between the channels. These two channels are perpendicular to each other in space and have a heat transfer effect. Ideal, able to withstand certain thermal and water hammer impacts, not easily damaged; Compact structure, small footprint, and good universality of parts

Used 15 square titanium condenser