Turbidity/suspended solids (sludge concentration) analyzer

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Typical application: The $r $n suspended solids online analyzer can be used to measure sludge concentration in sewage treatment plants, evaluate the quality of activated sludge, or the entire biological treatment process; Measurement of turbidity of backwash water in the filter tank of the water plant, measurement of turbidity of raw water and effluent from the sedimentation tank; The water quality of industrial production processes/circulating cooling water.

Product Details

Instrument features:

This suspended solids online analyzer can detect both turbidity and suspended solids (or sludge) concentration
● Adopting dual beam infrared and scattered light photometer detection technology
The probe has self-cleaning function
The LED emits near-infrared light at 880nm to compensate for the color in the sample
● Multiple installation methods

Working Principle:

Inside the measurement probe of the SOLITAXTM sc turbidity/suspended solids online analyzer, there is a built-in LED light source located at a 45 ° angle, which can emit 880nm near-infrared light towards the sample. After scattering by suspended particles in the sample, the scattered light at a 90 ° angle to the incident light is detected on that sideThe instrument detects and calculates the turbidity of the sample. When measuring sludge concentration, the scattered light located at a 140 ° angle to the incident light is detected by the rear detector in that direction, and thenSuspended solids online analyzerBy calculating the signal strength detected by the front and rear detectors, the sludge concentration value is given.

Since LED emits near-infrared light at 880nm, the presence of color in the sample will not affect the measurement results.

Technical Specifications:

Technical indicators of suspended solids online analyzer

Measurement units: optional NTU, FNU g/L, mg/L, ppm, or% solids
Measurement accuracy: turbidity less than 1% of the reading, or ± 0.001NTU, whichever is greater
Suspended solids: less than 5% of the reading (depending on sludge homogeneity)
Repeatability: turbidity: less than 1% of the reading;
Suspended solids: less than 3% of the reading (whichever is greater)
Response time: 1 second
Installation method: Pipe insertion installation using ball valve, with a maximum small diameter of 100mm
(Carbon steel and stainless steel); Immersion installation using pool edge fixed installation
Sample flow rate: maximum 3m/s
Operating temperature: 0-40 ℃
Sample temperature: 0-40 ℃
Sample pressure: 6Bar maximum
Probe size: Insertion type: 60 × 315mm
Immersion sensor: 60 × 200mm
Probe weight: Insertion type: 2.4KG
Immersion type: stainless steel material 1.38KG
PVC material 0.52KG
Cable length: Standard: 10 meters
The maximum length is 100 meters
Additional cables available: 7.6m, 15.2m, 30.5m,

Ordering Guide:

SOLITAXTM sc turbidity/suspended solids analyzer, standard configuration includes: sc200 controller, probe, operation manual, probe installation accessories

Installation accessories:

LZX414.00.10000 Immersion Installation Accessories
57384-00 Pipe Insertion Installation Accessories
69405-00 Water Plant Filter Backwash Water Turbidity Monitoring Installation Accessories
LZX050 scraper, 5-piece set