Transfer of second-hand 1 meter; 10 meter drum dryer

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The drum of the drum dryer is a slightly inclined and rotatable cylindrical body, with wet materials entering from the upper part of one end and dry materials collected from the lower part of the other end. Transfer of second-hand 1 meter #215; 10 meter drum dryer

Product Details

1、 Working principle of drum dryer

1. The working principle of a drum dryer is that the drum is mainly a slightly inclined and rotatable cylindrical body. Wet materials enter from the upper part of one end, while dry materials can be collected from the lower part of the other end. Hot air can enter from the feeding or discharging end and be discharged from the upper part of the other end.

2. The working principle of the drum dryer is that the drum is equipped with a forward plate, which can continuously pick up and then sprinkle the material during the rotation of the drum, making it fully in contact with the hot air flow, thereby improving the efficiency of the dryer and allowing the material to continue to move forward. Supply of new drum dryer

3. The general heat sources for drying materials are hot air, high-temperature flue gas, and water vapor.

4. The working principle of a drum dryer is generally as follows: the liquid material that needs to be dried flows from the high-level tank into the receiving tank of the drum dryer, and the film spreading device attaches the material thinly to the surface.

5. There is a heating medium inside, and the food industry often uses steam, with a pressure generally between 0.2 and 6 MPa and a temperature between 120 and 150 ℃. In addition, the material transfers heat from the simple wall during rotation, causing it to wet and vaporize.

6. The rolling mill completes the processes of film spreading, vaporization, and dehydration within one rotation cycle. The dried material is scraped off by a scraper and transported by a screw to the finished product storage tank.

7. The working principle of the drum dryer is to crush it after the process and then package it directly. The water evaporated during heat transfer can be treated as its own properties and introduced into the corresponding treatment device to capture dust or gas emissions through a sealed hood.

Transfer of second-hand 1m x 10m drum dryer