Thin film microporous aerator

Thin film microporous aeratorDesigned with a slightly raised arched surface, using ABS engineering plastic as the main body, the membrane has an imported rubber (EPDM) with an adhesive surface, which is made through special processing to ensure the quality and accuracy of the holes. The aerator is designed with four air supply slots on the main panel during oxygen aeration, allowing the incoming air to be buffered by check valves and directly sent to the aerator, ensuring that the membrane can be easily opened with low resistance at once. The membrane adopts ribbed locking mechanical assembly to ensure that the membrane * falls off. During air intake, the micro pores on the air film expand and open on their own to ensure the passage of air. When the aeration is stopped, the variable micropores on the air distribution film are in a closed state. Due to the self expansion and contraction of the variable micropores on the air distribution film, the phenomenon of micropore blockage in the aerator is avoided.

Secondly, in Thin film microporous aeratorThe chassis is equipped with a check valve device to prevent the mixed liquid from entering the gas distribution branch pipe when the pipeline system stops supplying gas, which can prevent the mixed liquid from entering the branch pipe and being blocked. The incoming air does not require special filtration, intermittent aeration is not blocked, and significant technical improvements have been made to the common problems of blown and torn air distribution membranes, as well as the inability to open or block membranes in variable microporous aerator lamps. These technological reforms have eliminated the need for maintenance during operation, making it an excellent product of the new generation.

Green Ye Environmental Protection Aerator Manufacturer-Fine bubble diffuserparameter

Aerator size: Φ 200mm, 260mm
Service area: 0.25-0.55m2/piece, 0.35-0.75m2/piece
Average pore size of aeration membrane during operation: 80-100 microns
Air flow rate: 1.5-3m3/h per hour
Total oxygen transfer coefficient: kla (20 ℃) 0.204-0.337min-1
Oxygen utilization rate: (water depth 3.2m) 18.4-27.7%
Oxygenation capacity: 0.112-0.185kgO2/m3h
Oxygenation power efficiency: 4.46-5.19KgO2/kwh
Aeration resistance: 180-280mmH2O

Specification parameter table:

Guangzhou Lvye Environmental Protection Equipment Co., Ltd. was established in 2007 and is a large-scale environmental protection equipment manufacturer in South China,There are tens of thousands of cases.Aeration head manufacturer, aeration head priceHigh cost-effectiveness.

Installation:

Choose Green Ye Environmental Protection215 aeration head, 260 aeration head, microporous aeration head, disc aeration head, membrane aerator.The diameter of the gas-liquid interface is small, the gas-liquid interface area is large, the bubbles diffuse evenly, and there will be no pore blockage,Fine bubble diffuserStrong corrosion resistance，