Welcome Customer !

Membership

Help

Guangzhou Lvye Environmental Protection Equipment Co., Ltd
Custom manufacturer

Main Products:

mechb2b>Products

Guangzhou Lvye Environmental Protection Equipment Co., Ltd

  • E-mail

    lvyehb168@163.com

  • Phone

    13602483977

  • Address

    1st floor, Building 9, No. 24 Maihua Road, Meihuayuan, Baiyun District, Guangzhou City, Guangdong Province.

Contact Now

EPDM microporous aerator

NegotiableUpdate on 03/22
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The EPDM microporous aerator is another membrane type microporous aerator product newly developed by our company. ABS engineering plastic is used as the chassis and pallet, and the air distribution film is made of EPDM or silicone material. The aeration device consists of an aerator, regulator, connector, and air distribution pipeline, tee, four-way, elbow and other pipe fittings.
Product Details

EPDM microporous aeratorThis is another membrane based microporous aeration product newly developed by our company. adoptABSEngineering plastics are used for the chassis and pallet, and the air film is made of EPDM rubber(EPDM)Alternatively, it can be made of silicone material, and the aeration device consists of an aerator, regulator, connector, and pipe fittings such as air distribution pipes, tees, tees, elbows, etc.

Membrane aerator is a new type of aeration facility that can meet the needs of all aeration tanks, biological contact oxidation tanks, biological stabilization ponds, and other places.

The membrane aerator is arranged according to the gas supply volume and tank shape density, and the aerator and gas distribution pipeline are arranged usingC3/4Threaded connection, the base is internally threaded (fixed on the air distribution pipeline), and the aerator is externally threaded. When installing, first set the required size of the regulator to the bottom of the pool, and then use clamps to fix the gas pipeline to the regulator.

The main characteristics are small bubble diameter, uniform bubble diffusion, and strong corrosion resistance.

Green Ye Environmental Protection Aerator Manufacturer-EPDM microporous aeratorparameter

Aerator size: Φ 200mm, 260mm
Service area: 0.25-0.55m2/piece, 0.35-0.75m2/piece
Average pore size of aeration membrane during operation: 80-100 microns
Air flow rate: 1.5-3m3/h per hour
Total oxygen transfer coefficient: kla (20 ℃) 0.204-0.337min-1
Oxygen utilization rate: (water depth 3.2m) 18.4-27.7%
Oxygenation capacity: 0.112-0.185kgO2/m3h
Oxygenation power efficiency: 4.46-5.19KgO2/kwh
Aeration resistance: 180-280mmH2O

Specification parameter table:

Choose Green Ye Environmental Protection215 aeration head, 260 aeration head, microporous aeration head, disc aeration head, membrane aerator.The diameter of the gas-liquid interface is small, the gas-liquid interface area is large, the bubbles diffuse evenly, and there will be no pore blockage,215 microporous aeratorStrong corrosion resistance

Guangzhou Lvye Environmental Protection Equipment Co., Ltd. was established in 2007 and is a large-scale environmental protection equipment manufacturer in South China,There are tens of thousands of cases.Aeration head manufacturer, aeration head priceHigh cost-effectiveness.