Thermal energy of 1 ton biomass pellet fuel burner

Thermal energy of 1 ton biomass pellet fuel burner

Product Display*

1. Fuel used: wood pellet biomass fuel;

2. High combustion efficiency: Boiling semi gasification combustion combined with tangential swirl air distribution design enables fuel and combustion efficiency to reach over 90%;

3. Combustion * and stability: The equipment operates under slight pressure without experiencing tempering or misfiring;

4. Wide range of thermal load adjustment: The thermal load of the combustion engine can be quickly adjusted within the range of 30% -120% of the rated load, and the starting block responds sensitively;

5. The pollution-free and environmentally friendly benefits are obvious: using renewable biomass energy as fuel, the sustainable utilization of energy has been achieved. The use of low-temperature segmented combustion technology results in low emissions of nitrogen oxides, sulfur dioxide, dust, and other pollutants in the flue gas, making it the best alternative to coal stoves and other equipment;

6. No tar, wastewater and other waste discharge: using high-temperature gas direct combustion technology, tar and other waste are directly burned in gaseous form, solving the technical problem of high tar content in biomass gasification and avoiding secondary pollution of water quality caused by washed tar

7. Easy to operate and maintain: using automatic feeding and wind powered ash removal, the operation is simple, the workload is small, and a single person on duty is sufficient; 8. Low investment and operating costs: biomass combustion

The combustion structure design is reasonable, and the renovation cost is low when used for various boilers.

Thermal energy of 1 ton biomass pellet fuel burner

Significant features of biomass burner:

1Using biomass pellets and agricultural waste such as straw, wheat straw, corn stalks, corn cobs, rice husks, peanut shells, cotton hulls, cotton stalks, thatch, weeds, etc., as fuel for forests such as trees, bark, roots, leaves, shavings, bamboo powder, sawdust, etc.

2No harmful gases such as CO2 and SO2 are produced, it is green and environmentally friendly. The materials used in the burner are preferably crushed materials of less than 3MM. Of course, biomass pellets can also be directly used. Our factory supplies in large quantities all year round, and we can also purchase our own machines for production, with a cost of about 290 yuan per ton.

3Spiral feeding, high temperature oxygenation, temperature control and water replenishment fully automatic intelligent control. One person on duty, automatic operation.

4Vortex design, multi-stage cyclone oxygenation, raw materialszuiMaximum combustion, thermal efficiency up to 95%, temperature can reach 800-1200 ℃.

5Compared to directly burning coal, it saves 30-40% of costs and saves more than 100000 yuan in annual expenses. Compared to directly burning oil and gas, it saves 50-70% of costs and saves up to 300000 yuan in annual expenses Biomass straw and other agricultural and forestry waste are ubiquitous in both urban and rural areas of China.

Application characteristics of biomass pellet high-temperature pyrolysis combustion machine (boiler energy-saving machine):

A、 Small size, easy to install and move. Quickly move away in case of power outage or fuel shortage. B、 Directly connect with the original boiler mouth without making any modifications to the original boiler. C、 Burning various types of wood chips, wood shavings, oilseed shells, or biomass pellets. D、 The cost is half of fuel and gas. E、 No harmful gases, wastewater, or waste discharge, and can be used normally even in urban areas. F 、 A biomass burner costing tens of thousands of yuan is a fraction of a biomass boiler and has the same effect.

Application scope of energy-saving machines for biomass high-temperature cracking boilers: steam boilers, hot water boilers, industrial furnaces, incinerators, melting furnaces, kitchen equipment, drying equipment, food drying equipment, ironing equipment, paint baking equipment, highway construction machinery equipment, industrial annealing furnaces, asphalt heating equipment, die-casting machines

Based on the introduction of * combustion technology and combined with the actual situation in China, the biomass combustion machine produced by Zuo Tu is designed and developed using low-cost biomass pellet fuel as fuel, taking into account the special characteristics of biomass fuel. This series of products adopts semi gasification suspension combustion technology, with a reasonable structure, fully automatic intelligent operation, touch screen one click, Chinese LCD operation interface, fully sealed variable frequency speed control feeding, automatic ignition, automatic temperature control, and automatic conversion of large and small fires. The use of dual frequency conversion can achieve synchronous frequency of air and material supply, high thermal efficiency, sufficient combustion, and reduce the emission of dust at the ignition point. Dual connection and dual control, capable of controlling both temperature (high stop and low start) and boiler pressure. The characteristics include no pollution, low emissions, compact structure, simple and convenient installation, small space occupation, and low operating costs. To meet the needs of different customers and fully utilize heat energy, two types of protection are adopted: air-cooled and water-cooled, with air assisting combustion to make the flame temperature stronger and more powerful. The water-cooled structure can produce hot water for production or domestic use, or it can be connected to a boiler for secondary utilization, fully utilizing the heat source.