Teflon corrosion-resistant medium pressure fan

NegotiableUpdate on 05/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction Brand Deling Fan Pressure Medium Pressure Fan Material Cast Aluminum Performance Anti corrosion Fan Application Range Dust Removal Supply Current 3.3A Power 1.5kw Air Volume 1200m3/h Model DL-CX-100A Airflow Direction Centrifugal Teflon Anti corrosion Medium Pressure Fan Application in the chemical and pharmaceutical industries can solve the corrosion and wear of chemical drugs on equipment, while ensuring that the equipment works normally in high temperature environments. There is no need to worry about metal ions entering the material due to corrosion, because the dense Teflon coating will have a good isolation effect on the surface of the equipment

Product Details

Product Introduction

brand	Deling	Fan pressure	medium pressure fan
material	cast aluminum	performance	Anti corrosion fan
Scope of Application	Dust removal and air supply	current	3.3A
power	1.5kw	air volume	1200m3/h
model	DL-CX-100A	airflow direction	centrifugal

The application of PTFE anti-corrosion medium pressure fans in the chemical and pharmaceutical industries can solve the corrosion and wear of equipment caused by chemical drugs, while ensuring the normal operation of equipment in high temperature environments. There is no need to worry about metal ions entering the material due to corrosion, because the dense PTFE coating will provide good isolation on the surface of the equipment.

Details

Performance characteristics of PTFE anti-corrosion medium pressure fan: 1. Type, the motor runs directly, and by adding an integrated sound suppression device, the noisy phenomenon is improved, thus achieving the desired effect. 2. Made of aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting. 3. The motor is a fully enclosed external fan type aluminum frame motor with a special axis design, which can be used for a full length of time. 4. Special blade design, high pressure, large air volume, long service life. 5. Special air volume control damper, with high stability in air volume control and easy operation. 6. Complete range of styles and abundant inventory!

Configuration of medium pressure blower: motor: made according to European CE specifications

Standard: Use a 2-pole motor with IP55 and F-grade insulation to directly drive the oil seal. Use a maintenance free shaft seal to separate the motor and blower body casing. The blower and motor casing are separately cast, with a smooth and defect free surface. Both exhaust and intake pipes are equipped to reduce noise.

Precautions for installation of PTFE anti-corrosion medium pressure fan: 1 Installation location: It must be installed indoors in a place that is not affected by wind and rain Environmental temperature: below 40 ℃ Relative humidity: below 80% Air quality: If the air contains corrosive or flammable gases such as acids and alkalis, it should not be transported by high-pressure blowers to avoid danger Dust protection: Avoid using in places with large amounts of dust, powder, or fibers. If it is necessary to use in such places, please install a filter and regularly clean the dust attached to the filter and inside the high-pressure blower Ventilation and heat dissipation: Please choose to use it in a well ventilated place and not in a sealed room or box Placement space: For the convenience of column maintenance or repair, please avoid installing in overly narrow locations Avoid vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, anti vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibrations