Carving machine suction air pump

NegotiableUpdate on 05/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction Material Cast Aluminum Supporting Motor Power 7.5kw Scope of Application Woodworking Carving Machine, Vibration Knife Cutting Machine, Vacuum Adsorption Blade Number Single Weight 75kg Shaft Power 7.5kw Speed 2900r/min Model DL-83-X3 Air Volume 700m3/h Negative Pressure 27kpa Fan Pressure High Pressure Fan Type Vortex Fan, Air Pump Performance Low Noise Fan Sales Scope National Logistics Transportation Special Line, Express Delivery Sales Location National Details Introduction Carving Machine Adsorption Air Pump, also known as Vacuum Pump, also known as Air Pump

Product Details

Product Introduction

material	cast aluminum	Supporting motor power	7.5kw
Scope of Application	Woodworking carving machine, vibrating knife cutting machine, vacuum suction	number of blades	single
weight	75kg	shaft power	7.5kw
speed	2900r/min	model	DL-83-X3
air volume	700m3/h	negative pressure	27kpa
Fan pressure	high-pressure blower	type	Vortex fan, air pump
performance	Low noise fan	Sales Scope	nationwide
logistics transportation	Dedicated line, express delivery	Sellable land	nationwide

Details

Carving machine suction air pumpAlso known as vacuum pump or air pump. Mainly used for woodworking carving machines. If used in conjunction with a carving machine, it is mainly used for heat dissipation. In addition, the negative pressure generated by it can cause the vacuum table to adsorb the board, thereby playing a fixing role.A blade type fluid machinery that can be used for both gas suction and gas pressure delivery. Its working parts mainly consist of a rotating multi piece impeller and a stationary annular flow channel (i.e., a bright body). Its impeller structure is similar to that of a steam inlet turbine impeller, and there are no vulnerable parts. Therefore, compared with volumetric fans, its characteristic is a simple structure.

1、 Definition of High Pressure Fan

A high-pressure fan is an air pump that generates power based on the principle of centrifugal force, also known as a vortex pump, vortex fan, or air pump; It is commonly referred to as an air ring fan or a side flow fan in foreign countries.

2、 Working principle of high-pressure fan

After the power is turned on, the fan rotates. Due to the groove design of the impeller, it will drive air flow. Therefore, air enters the pump body through the inlet, and the air is stirred inside. Each groove is pressurized in a vortex like manner, circulating one after another, ultimately forming a strong airflow energy, which is discharged from the pump body through the outlet for use.

Carving machine suction air pumpThe precautions before installation mainly include:

(1) A comprehensive and careful inspection should be conducted to ensure that the air pump and other components are intact and undamaged, and that all fasteners, such as bolts, are not loose or detached. And whether there is any friction problem between the impeller and the fan cover. Also, it is about whether the vortex air pump was damaged during transportation.

(2) For the determination of the outlet position of the vortex air pump and the surrounding environment, it is mainly required that there should be no obstacles within 2.5 to 3 meters opposite its outlet to avoid affecting air circulation and equipment heat dissipation.