TS-K100CZ (A) hole slot sediment thickness detector

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TS-K100CZ (A) Hole and Groove Sediment Thickness Tester Brief Introduction: The sediment thickness is measured using probe pressure testing method: when the sediment probe is lowered to the bottom of the hole and groove, the motor automatically stops lowering the probe, and the host reads the probe status. When the probe tilts beyond a certain range, it prompts to adjust the probe position until the probe is approximately upright. The host controls the probe to slowly extend, while measuring the probe pressure and extension length. When the pressure exceeds a certain value, it stops, and the extension length of the probe is the current sediment thickness at the current position.

Product Details

main purpose

Measurement of sediment thickness during drilling and trenching.

Working principle

The thickness of sediment is measured using probe pressure testing method: when the sediment probe is lowered to the bottom of the hole groove, the motor automatically stops lowering the probe,The host reads the probe status and prompts to adjust the probe position until it is approximately upright when the probe tilts beyond a certain range. hostControl the probe to slowly extend, while measuring the probe pressure and extension length. Stop when the pressure exceeds a certain value, at which point the probe extendsThe length is the thickness of sediment at the current position.

Technical features

1.Wide range of applicationsThe measurement indicators are independent of medium characteristics such as mud and water quality, and are suitable for detecting sediment thickness in all holes and grooves;

2.Less influencing factors and high detection accuracyThe probe has a small diameter and can directly reach the hard rock layer at the bottom of the pile; Probe with tray, ensure probe stopsOn the surface of sediment; The probe is equipped with a built-in tilt angle sensor to ensure that the probe is upright;

3.Sediment probe is versatileIt can be used in conjunction with the main unit of the sediment analyzer, and can be used separately for sediment thickness detection, as well as for hole and groove detectionThe measurement system is used in conjunction with the aperture slot width detection to complete the sediment thickness detection at the same time;

4.The test results are intuitiveThe host displays the depth pressure curve and inclination value in real-time.

certificate