Supply NWX internal and external thread integrated machining machine - whirlwind milling

The N series cyclone milling head is an efficient and special function component configured on a horizontal lathe, used for high-speed milling of various metric, imperial, modular, and radial control external and internal threads. Use a cutter head for milling external threads and a tool holder for milling internal threads. Using a whirlwind milling head to mill various threads on a horizontal lathe breaks the traditional turning process. When processing various types of screws, screw rods, worm gears, and nuts, it can be finished in one go, improving work efficiency several times and achieving higher surface quality than turning. Install and use the whirlwind milling head without changing the structure, performance, and purpose of the lathe.

N40 milling external thread with a diameter ranging from Φ 10 to Φ 40; Milling internal thread with a diameter ranging from Φ 24 to Φ 120

N60 milling external thread with a diameter ranging from 10 to 60; Milling internal thread with a diameter ranging from Φ 24 to Φ 120

N80 milling external thread with a diameter of Φ 20 ～ Φ 80; Milling internal thread with a diameter ranging from Φ 24 to Φ 150

The length of the external thread milled by the whirlwind milling head depends on the center distance between the lathe head and tail. When milling longer workpieces, in order to ensure no vibration and no tool breakage, a set of accompanying guide center frames are installed at the front and rear of the lathe slide. When you remove the whirlwind milling head and reinstall the lathe tool holder, you can restore the various functions of the lathe and perform various turning tasks, everything will be as before.